Search results

Danl M915A1 case farm tractor I'm going to be doing the same job' I cleared the vent and it seemed to stop leaking, but I haven't ran the truck far jest around home , where dose one get new lock washers

Danl M915A1 the tranny shop called me back its the weekend and he is not sure monday when the boss comes in he'll call me I gave this guy all the info that he needed but he is one of those not sure guys

Danl M915A1 Thanks NDT for that purr We have good additive around here that will help,My filters are new. When I step on the Jake I push out all kind of black smoke Thought the stack pipe as well as takeing or hard, Is that normal

Danl M915A1 you guys are so cool this trend or post what ever you want to call it about this camper family thing was great reading fun [thumbzup] I'm glad to be part of MV Group , I like my truck and it only goes 50 but it will haul anything.:driver:

danl Don't feel bad it didn't work for me eather

Danl M915A1 case farm tractor I have a 915 and I to feel the 400 runs like ****, I thought it was jest mine, I was going to tear into the fuel system,. Now I know its the way it runs I will work on the high Idle and let you know how things work out, keep in mind the ht750 allison tranny Barks...

Danl M915A1 case farm tractor Ok on the m915 driving with no trailer and all air conect sealed, or caped off . how or whats the best way to run the trailer brake valve, trailer brake on or off?

Danl M915A1 case farm tractor I'm right here in lyman Maine, now that you are into MVs you will see me all around befor when you saw me you thought nothing about it check it out Danl

Danl M915A1 case farm tractor The drivers side tank jest behind the cab has a Quick disconect you can plug in there. but if you tow her the front is set up to take atow bar and has air lines set there jest like hooking up a trailer. the truck has a masive air system there is four air tanks it...

Danl M915A1 case farm tractor your misstaken I got aa army farm tractor got it in fort hood best tractor I have tires a loaded 86 horse real hard puller

Danl M915A1 case farm tractor They use farm tractors I got a intrnation case 86 Hp I run it every day I can send you pic of the army paint job if you would like, seams like folks remember me because of the paint job Call that army guy he will put his tractor to that job, works good for me...

Danl M915A1 I think if you build this truck frame work, lift kits tire size change. Were there is no tital, you become the builder you set the Gvw.jest stay inside of true speck and dump your broker find one that will play ball, Most of these Mv when we get finish with them thay are home...

Danl M915A1 I'm in lyman were is this place in berwick Rout 9 Prat . were is it from prat. please let me know I need apart thank you Dan.l:shock:

Danl M915A1 You got it Right Katahdin Redstone Al. to lLyman Maine Tell me I'm not a DAMMED YANKEE Ha HA Once I knew that the law thought i was armyI drove rigth pass scales never woried about the log got to Bristall Va befor i stop to sleep in a small motell 30 buck, plus the truck was...

Hello I'm from Maine I'm new here Been checking things out . I like what I see here . I hope to blend in with you guys, Folke around me think that I.m Nuts because of my passion of MV. Well i jest found all the nuts in the great USA thank you Guys. Lets have fun . I bouth a AM Genarel m915A1 in...

Got aFift wheel plate set up from a M915a1 sitting on my shop floor if you would like Ksm715 Idear:beer:

Danl M915A1 Get your ytuck on a scale if the truck is lighter than 26 thousnad pounds than reg. it for for 25,500 pounds and you will be all set, jest don;t over load the truck and you should be all set, if you work the truck than that is not an RV. I really think that truck will be lighter...

Danl M915A1 This is easy do you have power [12 Volts] befor Floor switch ,YES OK. No than there is a fuse done in do you have power befor the throttle swith yes OK no than the floor swith is done in do you have power befor retarder seleter switch Yes ok No the throttle switch is done...

bm3 Leg I'm a new guy up here in the north east got a M915A1 still working on it jest learning nobout this site I'll try to hook mup with the scarbro guy I'm in lyman hopefully I have things ready for the rally