Search results

So, what does the trans lamp status while truck is in “start“ position and what is status for lamp in “running” state? also…have you pressed the transmission circuit breaker button?

well, in most cases, it’s a differing of opinions and facts, what makes you or anyone else believe that there is a “Right and wrong”, it’s not that black and white

Well, always two sides to every story…

i just realized that this thread you created some time ago has all the information you might ever need…its quite informative

What are you needing? I sell and assemble late model turret along with GPK,OGPK and MCTAGS

just start by taking it apart one piece at a time,hatch, weapons trays, bearing…may come apart easier than you think. I’ve stopped using any sort of adhesives as it has no advantages I’ve seen except around the roof to bearing.

Hmmwv’s fit on standard auto hauler trailers, the tires just squeeze by the trailer tire skirts. A basic 2 man stripped M1123 is 5850lbs.

It depends on how it was installed, I’ve taken apart hundreds of turrets apart, if someone used gobs of body panal adhesive, your gonna be prying crap apart.

My local radiator shop still boils out and cleans, repairs my radiators….

Chyna bulbs from some of our so called American parts suppliers no doubt…

Various other acc such as the hatch prop, blast deflector.

no such animal at the moment

The #1 leak point for fuel tanks when full is the filler neck to tank hose…either loose hose clamp or the rubber is as soft as a wet noodle, only leaks when full or parked on a grade.

the Transmissio/accessories panal behind the battery box is for all additional 12 and 24v accessories such as Cig lighter adapter, AFES, deicer module etc…

i suggest buying a new pan as well…

well, you don’t use RTV on transmission pan, the gasket on the 4L80e is reusable, the 3 speed uses a cork gasket, no RTV required.

There is a fill plug and a drain plug on the GFD…

Chynaaa!

I have a friend who has 2 fully restored units for sale

That piece is glued onto the AF cannister, just glue it back on, I just did one today, RTV and 4 1/8in rivets.