Search results

Thats how I did mine. Bolted thru the flanges and I will be adding flitch plates around the spring hangers. The second pic shows (crudely drawn) how the plates will placed.

In my opinion, If its gone that far, whats the point. Back to the Original thread intent, Just because someone thinks something is old and outdated does not mean it has lost all its usefullness. And as far as the Gov entrapment stuff. I'd much rather see the FBI convince someone to try...

There are pros and cons to both set ups. Bobbing a Deuce takes a fair amount of work no matter which bed you use. ps I'm taking my bobbed truck up to my father in laws next weekend to install the M105 bed I have sitting up at his place

Nice, your going to change the color of those beadlock rings right? :p

Unless said cop puts one well placed shot through that cab.

Yes as you know by now your way off. thats a SEE ( small emplacement excavator)

I dont think you can fill it. You have to buy a replacement bottle. Edit: not sure why your pic wont attach. Its definately small enough

When your truck is being towed, (think of your truck as now being a trailer) you hook up the air lines from the towing vehicle to the front of your truck. Emergency glad hand enables the towing vehicle to fill the air tanks on your (towed) truck and the service gladhand operates the brakes on...

Ether (sp?) start. Its a way to spray a metered shot of ether into the motor to help it start. Edit: how big is the pic? They have to be smaller than a certain size to attach.

It sold for $4000, That the only extra info I could get.

Do you have the sale# and lot # from the sale?

Disreguard my comment on the reverse pulling with rockwells. I know you can pull the chunk out and spin it 180 and drop it in. So it may not be as big of a concern as it would be in a reg. ring and pinion set up. (I need to do more research before I go talking out of my a** :oops:)

I just went out and measured my S250. 70" tall by 79.5" wide. It might fit under the cover. Now that I think of it, the thread I was thinking of may have been a 250 in a M105 Edit: if you pull the skids off the bottom that might gain you about 1.5" or 2"

IIRC its been asked before and it wont fit under the cargo cover. I can get dimensions off my shelter if you need them. ( I dont know the height of the cargo cover corners)

Pulling (hard pull) in reverse can bust your ring gear (stripped gears).

I thought it might be something like that but I wasnt sure. Thanks, I try to learn something new every day.

Cant you just flip the driver side and install it or are they not the same dimension?

ccequipments truck http://www.steelsoldiers.com/deuce-modification-hot-rodding/45809-m35a2-crew-cab-2-rear-steer.html One of the other trucks he has done. http://www.steelsoldiers.com/deuce-modification-hot-rodding/35794-double-deuce-crew-cab.html

You have the rest of the F16? :shock:

Im with AceHigh, Buy and resell if you have to. If its that low you should be able to re-sell pretty quik.