Search results

Say what lubricant is in transmission/transfer case. May want to re-tighten all the jack shaft bolts while you have the floor plates up. Those fasteners are grade 8 with grade 9 nuts, notorious for loosening. May want to do the GAA grease PM on all those zerks down in there.

Does it work proper when you double clutch it?

Eastern surplus implies that they have the kit- "call for price"

Here, I "appropiated this" from that knowledgable internet guy. Induced drag is less when one takes a C130 down low. Wingspan is 132' so somewhere down low at 60-70 feet she will get more efficient. When an aircraft flies at a ground level approximately at or below the half length of the...

M35A2 Deuce has two meteric threaded thing in it. What kind of MV are you writing about?

One could search here in this site and be inanduated with all the photos and advise Where the heck it that hingingie that says search this site?

Trucks were built and then painted for that WAR, whichever it was. Trucks were painted to hid ther troop. I got a paintbrucsh and some paint to make my equipment hide. Depends all on Who Why Where What and When It could happen one must dedstroy the truck to save our butt

Been done https://www.steelsoldiers.com/threads/sat-behind-the-wheel-of-a-deuce-for-the-first-time.98891/ I suggest to change seat and all you can do before messing with steering shaft. I just put PS I suggest lots of stuff, don't mind me...

cool beans, this is gonnah be good.

OH MY My, Now those lawyres will be involved.

https://www.steelsoldiers.com/threads/m35a2-parker-fuel-pump-install.191029/

deleted

Much information available. Searched for 8V92 and much information avaialable for free as 8V92 used in marine applications. Just google 8V92. also gov planet sold one in the container for $5005 in Octoberr.

Like everybody else I would love to have my jeep I drove all over Germany. On another note where I worked here in the US on jet engines We used Aeroshell 500 in those machines that would use it up. When We had a leak or had to get rid of 20 barrells at a time there was no problem, a company...

Nice. I also had to move air in and out of the Deuce truck and to main shop compressor and various other needs. Having truck aired up without it running is good to find air leaks too. Also tapped into under-dash for a tire filler-upper so I wouldn't be near the tire when airing it up.

and you can't get the tools for three bucks anymore either.

"Does that mean all our archived pictures and documents are gone ? " !?

Kentools This may be a good place to put this catalog .

https://books.google.com/books?id=86UXDAAAQBAJ&printsec=frontcover&dq=Mkl+Bren+Carrier+Canada+museum&hl=en&newbks=1&newbks_redir=0&sa=X&ved=2ahUKEwiSvbWBqKTmAhWDzlkKHYMxBfYQ6AEwAXoECAYQAg#v=onepage&q&f=false Fiqure what screen mesh you want and make a couple, just silver soldered together. You...