• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. frank8003

    Chasing the loss of power in the 6.5

    http://www.ssdieselsupply.com/p56_6.5td_crankcase_depression_regulator_valve.html https://www.dieselhub.com/maintenance/6.5-diesel-cdr-valve.html
  2. frank8003

    Deuce piston invention continues to evolve

    Spherical turbulation Just keeps getting better since original idea. Is it only the multifuel diesel does not clatter? Four set of rings. http://www.engineprofessional.com/EPQ2-2020/mobile/index.html#p=16...
  3. frank8003

    Not starting because no fuel?

    When you last shut off the engine as You normally do, did you pull out the shut off slowly until she died or just yam out the handle as if it was some kind of a valve? If the answer is the latter part of above then it just may be the button. Study what happens with the governor when the engine...
  4. frank8003

    Deuce runs only at idle

    maybe it went this time.....................
  5. frank8003

    Deuce runs only at idle

    "My problem is that my truck will only run at idle. When I push on the accelerator there is no increase in engine speed. " Study what all that does happen when one shuts it OFF and go backwards and study. What does the govenor DO when you shut the engine down? Have to start someplace........
  6. frank8003

    cost of ownership (the real cost of a deuce)

    and it will all be worth it.........................
  7. frank8003

    Staining or painting the floor hump mat?

    could not resist....................... "but if I wanted a black or gray hump, is there a way to color it " Just leave it alone Pull the entire hump off and look at all those things that got "forgot" in all the PM's since she was new. There is over 1111 systems on the truck to work on without...
  8. frank8003

    M35A2 Transmission Fluid Change

    from 2007
  9. frank8003

    M35A2 Transmission Fluid Change

    The ancient question (circa 1960) of to use detergeant oil or non-detergenat oil answer is to see if that particualr lube system is circulating and pressurized. If it is a gearbox of normal machines and is circulated by action of the parts but not by pump then the basic design is to allow that...
  10. frank8003

    M39 hydraulic brake master cylinder vent line connected to air pack: capping

    May be something in the PS archives to help you
  11. frank8003

    new to the MV crew seeking any and all general info and suggestions

    You can now be as busy as you want to be forever. Put BMY M934A2 or parts of that into the search box and begin. https://en.wikipedia.org/wiki/M939_series_5-ton_6x6_truck
  12. frank8003

    Question about where to post some old photos

    Put in Messhall
  13. frank8003

    Mobil 1 in a HMMWV

    Mobile 1 will work in your Diesel engine just fine. There is many flavors of Mobile 1 Choose correct. https://www.mobil.com/en/lubricants/for-personal-vehicles/our-products/products/mobil-1-turbo-diesel-truck-5w-40/
  14. frank8003

    Mobil 1 in a HMMWV

    What is OEM oil that is good enough for that engine, is is much cheaper? If you want it to last forever it must be running as if She was designed to be used. What is design manufacturer OEM lube oil?
  15. frank8003

    B17 Nine-O-Nine crash in CT - 2019-10-02

    How many guys used to work on one B17 continuously for Her to go on a mission? How many guys just cleaned and gapped plugs all day every day and all night?
  16. frank8003

    Charging system upgrade for the Deuce

    Zero problems with this job Do what somebody I know well did. Trace EVERY wire everywhere to the ground and CLEAN them all. 50 year old truck may have some corrosion sometimes. Put Her back the way She was built and get another 50 years.
  17. frank8003

    Need Part number for Window channel/sash channel (Pic)

    https://www.steelsoldiers.com/search/159344/?q=M35A2+hinge&o=date There is many, many searches One may do in th database HERE about most any subject from door hingies and up. Take your time Be patient It is where I found all about the windows, I stll have parts Problem is many bottom parts...
  18. frank8003

    M35A2 Brake System Replacement

    I always wondered if there be an "overpressure test" for all the steel brakelines and how I could go about that.It all must work proper when you done Replace it all, depends on how you value things. Replacement of all the tubing is quite time consuming and expensive but probalby worth it. The...
  19. frank8003

    Fastener Help

    Please copy all that data to CD or DVD or USB Cruzer another puter or something to save it, Please
Top