• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. porkysplace

    Can't post

    I can't post with the submit reply button without the quote
  2. porkysplace

    m871 deck height?

    With no top and the windshields folded down and take the stack off it should work.
  3. porkysplace

    Rome plow pics

    There are some more pictures in this thread Military Gun Dozers
  4. porkysplace

    It looks like I need a TM for the A3 but can some tell me the oil capacity?

    jatonka has them but that would involve a 30 second search
  5. porkysplace

    It looks like I need a TM for the A3 but can some tell me the oil capacity?

    You should have had the Tm's downloaded before you drove it home .
  6. porkysplace

    M35 axel seal's

    You can download the the TM's at ; www.jatonkam35s.com or www.liberatedmanuals.com
  7. porkysplace

    Code Enforcement

    It sounds like you need to have a mni-rally / pig roast anst fill every parking spot on the street with GREEN IRON . [thumbzup]
  8. porkysplace

    Code Enforcement

    You could ask them if they prefered you build a multi-unit rent subsidized rental on the property or park your trucks on it .
  9. porkysplace

    Feedback needed - towbar mount

    Looks like it would be blocking alot air to the radiator also
  10. porkysplace

    Where to find a cheap CUCV for parts?

    Pair of axels is worth as much as a running truck in most areas ,probabley worth more on the left coast
  11. porkysplace

    Hello everybody!

    Welcome , from michigan tecnical manuals can be downloaded from; www.jatonkam35s.com or www.liberatedmanuals.com downloading and read them is recommended it will help you uderstand what to look for when buying . It is also recommended to do a reasonable search for basic questions as most...
  12. porkysplace

    1971 M35A or 2001 M35A3?? Need opinions!

    Low miles isn't always a good thing , if it truly is low miles and not a speedo replaced you will be looking at dried up seals and other problems related to sitting . If looking for a low mile truck look for one that has verified brake work to it , the rubber seals in the break system tend to...
  13. porkysplace

    1971 M35A or 2001 M35A3?? Need opinions!

    this one
  14. porkysplace

    Wreckerman and Elmo AL to NE

    Well just look at his teacher :twisted:
  15. porkysplace

    WOOHOO! The tech manuals are back up!

    Not here either gimp must have been on a different site.
  16. porkysplace

    classified ads

    Can't the moderators give a 10 post penalty for whining about the 100 post rule ?
  17. porkysplace

    REAL Basics

    Quote "I've had a goodly number of 4WD trucks over the last forty years or so, including the NP205-equipped GMCs which were full-time AWD....they had a "locked" and "unlocked" capability in the transfer cases, and no 2WD setting at all. Is the Deuce somewhat similar in concept?" NP 205's are...
  18. porkysplace

    True or Not True?

    The only thing different in body parts is the cab floor between 2 and 4 wheel drive , The 1/2 ,3/4, and 1 tons all used the same sheet metal including replaceable bed sides that bolt-on in the front and weld-on in the rear.
  19. porkysplace

    What is the "body style" for a M35A3 on the SF97?

    Michigan considers them a stake truck , the SF-97 said cargo on it the S.O.S. wanted a picture ,then classiffied it a stake truck. Edit: anything over #10,000 without a factory pick-up bed requires a GVWR plate ,unless it meets antique status .
  20. porkysplace

    True or Not True?

    I would guess since the only difference would be some civi boxes had fuel doors on both sides . They all came down the same line at flint truck and bus and were most likely stamped at flint metal fab . Even if the government did spec it out different , with the crap GM was rolling out of the...
Top