Search results

cheaper, Lighter and shorter. plenty strong and very close final drive ratio. Get one from a 4x4 chevy with the 241 t-case and you will gain selectable 4x4 and it will bolt up to your bread truck adapter.

NV4500 5-speed.

HMMWV & CUCV with THM 400/4L80E and a round six tcase pattern will use these seals. square cut o-ring GM part # 8681168 round six gasket GM part # 24245110 Hope this helps you guys in the future....

Fwiw, you have to change the carriers to go to 4.10's

I vote KEEP BOTH OF THEM, Now you have an excuse to buy a slave cable and a tow bar !!!

Buy a DUKW next. Honestly, i bet it will run again, i dont think there will be as much sediment in vital areas as some think. To get LARGE amount of sediment you need flow, water working its way in through the breathers and slober tube is not going to permit much flow at all. With any luck vapor...

:doh: ever seen another cucv?

Subscribing so i can see the day time pics

pulls out dosnt it?

Keep in mind, be careful of the weld sparks. They WILL melt into glass. It always a good idea to protect Windows.

Just have a couple of questions for you guys about what you are using your trailers for. I know lots of M105's are being used for there beds & springs for bobers, but is anything like this happening with 101's? I ask because i am looking for a set of srpings from a 101 for use on a trailer my...

As said before, a "death wobble" is caused by worn steering / suspention items. Every truck has items that will enhance the problem more than others. I have had the death shake in fords with TTB, dodges with coil springs, chevys with both IFS and dana 60's, and in the deuce. You need to do a...

roflcoming from the guy who can't count....Dont get mad at me, i was polite and didnt aproach you with an additude. I simply pointed out that you listed 4 items. I dont care if you say one should be replaced with the other, YOU listed 4........... With all due (or not due) respect, i was only...

And you mentioned 4 items........

G, how are you guys balancing them? with a spin balancer or a static/bubble type? I ask because shops around here wont touch a tire this size

mine dose......

Might wanna re-word that.

Looks like a blast, glad to see somone enjoying / using there truck! [thumbzup] (and not complaining about its inabilities)

B.F.H. remove the tapered lock wasshers and lift it off. prying is a self defeating act with these. P.S. Passenger side is much easier as it dose not have taper locks

:shock:never new the man but RIP. wow.