Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Here's a PDF that goes over the different generations of WTEC. The "3" has a single digit display, while the "4" has a double-digit display. The "5" (which is not seen on FMTV's AFAIK) has a double digit display with a wrench icon between them...
Mine were completely disintegrated and only the single thick bushing had been replaced by the PO on my truck. Fortunately I scored some new old stock units and rebuilt my latch mount and was able to send two (one thick and one thin) as samples to the manufacturer that's fixing this situation for...
Item 11 is the nylon conical seat, and 12 is the steel conical washer to allow for alignment. 13 is the small flat washer. 3 and 8 are the BIG washers.
I'm running into a wall with these - I haven't found a way to contact BAE TVS yet. If anyone can help.....
Web searches indicate they closed up shop in Sealy, TX and auctioned the facility. So there may actually be no way forward if they manufactured these kits in house.
I haven't heard about...
It is not an A1R. That is the WTEC 3 transmission control and he stated it has the 100A alternator. The A1R would have the 260A alternator and the WTEC 4 transmission.
GENX - you have a late model A1...... A1R schematics are incorrect for your model..... you have something that's a hybrid of...
Yeah I've looked at those exact pages..... The SX150D operates at 12v. That replacement operates at 5v and I had thought that would make them not compatible but upon looking at the data sheet it appears the replacement will operate at nominal 5v but up a max of 12v so yeah I think this could...
Interesting. I've tried to contact BAE TVS and had no luck contacting any real persons. If anyone knows any actual people there please send me their contact info. Their contact form is ignored and their phone number says it's voicemail isn't setup and hangs up on you. Nice.
You installed a BRAND NEW MMDC? Or a "good" used one? I have not experienced what you describe. I would swap the air lines and see if the other gauge acts similarly to rule out some kind of supply pressure issue to the unit. If it stays with the same gauge after swapping the air lines front to...
Oh! Oh! Oh! I know this one.
99% likelihood the MMDC (Medallion Marine Data Concentrator) pressure transducer for the gauge is dead. Medallion made the mistake of putting the transducer inside the unit. But it can be repaired if you can locate a replacement transducer or harvest one from an...
I chose not to disable the LBCD with my 260A alternator as it does provide polarity protection and will disconnect the batteries and alert you if they are drawing more than 200A. I did have to replace my LBCD as the capacitors were leaking badly and the the studs were rusted and and several were...
It might be that remanufactured C7's were painted entirely yellow including valve cover at the depot level.
It's possible that remanufactured 3126B's were equipped with the serpentine upgrade as well.
These might represent trucks that had engines swapped out due to problems or failures.
C7's can have black or yellow valve covers according to my sources. Mine is black.
Serpentine modification kit NSN's:
2815-01-533-1324
2815-01-533-1308
No idea how common it was to install these. But they existed at one point.
Correct. The logistics of tracking "pairs" are beyond what I'm willing to do for free and then also have leftover pieces that don't do anyone much good, etc. Sadly the A1R that we both share and love is the minority and so for the good of the many I am only going to track and ship "sets" of 4...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!