Search results

Gimp better not get one - looks pretty top heavy and he needs no extra help to get kitty wonkers. rofl

As porkysplace brought up - you need to also get compliance on the tire load as well - more ply tire. Changing your air pressure is NG. Helper springs - can go seperatly this route as well as Air bag system is very good Additional Shock load increase - get rid of stock shocks. Might consider...

Pb since the last time I was used as a large dog bone - my wooden leg is changed to Maple and I put BBQ hickory flavor in it. I will post pics of the project I am working on - on the side of everything else - I am making our own fuel tanks from sheet - yup I am a glutton for punishment - $359...

I feel sorry for hearing about having to move stuff - almost up to the point where you are moving into a bodacious garage - shop - then it just all turns to envy.aua

OR keep it simple and get 24v ones. I use the Trucklite 24v LED flood - 4 of them on the top and have the LED headlights - you would swear a 747 was coming at you with landing lights on. Great for possum hunting off road using the truck and a butterfly net. Kinda like possum polo.

From our end of the spectrum here in Ga. as a producer of WMO. EPA under 50 CFR part 279 as a non hazardous product. The vendor we use is insured as we only dispose of 350 to 400 gallons per month of 15w40. No antifreeze and unless a diesel had a fuel in oil issue would be the only way diesel...

Fuel pump - Wikipedia, the free encyclopedia hard to put it in any other words

Some look like "U" brackets - at the end of the U they are bent 90 degrees where a small bolt goes through - they wrap around the mirror mounting arms so you can postion them how you like. Another style is an "L" bracket - the end of the L uses the bottom bolt on the mirror - and the long leg...

Read this one and then ask me why when you are done: http://www.steelsoldiers.com/members-rides/37068-my-new-ride-m109a3.html

DR - I had actually wanted to intall a Gen Set 4 kw Emerald unit I had as a slide in unit. Removing the tool box and making a slide in unit and then using the OEM door as a final closure unit so no one knew what was behind it. Meaning - open the door - slide the gen out - so all was incognito

Ever hear of the 3% ers in the colonies. Imagine of who acutally stands up for their county. That means 97% did nothing at all. If it works out for them - I am with them If it works out bad for them how stupid was it for trying to free themself. There is your 97% way of thinking Some (3%)...

Dug - I do not think my wife (whom it belongs to) will not let me even take it out the driveway (but I have a big area of GA powerline before I would have to get there) to test it. She probably will not even let me get a passenger seat - but I know she will more than welcome PB to ride with...

Clinto and ClintoGF have got a lot of stuff as well.

so when you finally get one - are ya going to ride the curbing in the courthouse parking ramps out there :beer: Good to see ya here. Welcome as a member to the MV fanatical world. A lot of folks get the model of unit in Rambo wrong and no harm and no foul - just get your chit together now...

WHAT did you say WM - HUH Only the sissified stick mufflers on their trucks and ruin their originality - just like me. They were add on's as mentioned above - and if WM could hear you he would tell ya to get very good hearing muff's or get a muffler on it. I have seen members ride with no...

By the way - for those sharp eyed members: The rear tailgate supports are NOT welded to the rear floor - I have carpenters clamps to help pull this area of the flooring back up into place and then clean it and weld it and then paint it. And if you did not notice - ya should have [thumbzup]

I high speed cut the rear seat section to heat and straighten the framework - got it as best as I could - cause I was not about to buy a new framework or padding. Still need the cushions and I just might make these as well and also the front drivers seat cushions. Cleaned up all the hardware...

Very well stated WM. I wonder why (and this relates to running my MV as it needs Fuel) why fuel 9 years ago was .85 cents a gallon. Many that have not been to Alaska - and may of those that sit back and do think any of this effects them. I have been there - I have seen it and it is treason...

IF - you are installing new ones - make sure you re-torque them no more than after a couple hundred miles as they will stretch from new. If old rechecking the above info was given.

I had another problem with a toy I was playing with so I did not get as far along as I wished Parts are either sanded - soaked in stripper then high speed wire brushed and blown clean - hand sanded - but whatever way the parts coming off are lossing their upwards 1/32 nds or more coats of...