Search results

Five have requested the TM cited above and I sent it to all. Any problems let me know.

OK back to post #30 https://www.steelsoldiers.com/threads/preventable-rear-suspension-failure.71520/post-1384412 for reviewing https://www.steelsoldiers.com/showthread.php?16605-tandem-axle-spring-seat-shaft-repair-upgrade.html

When you pull out all the 6 injectors squirt a bunch of Kroil in there. It can and has unstuck rings and stuff, just something I would do.

Many here want that (TM 9-2815-210-35) September 1964 The thing is 135mb so can not upload it here. I found it from Brian Patterson, an almost complete version. It is in my 18GB of Deuce files. Have offered it before with only a few takers. Send me an email and will send (TM 9-2815-210-35)...

Man does good in Texas. Another Attaboy!

"But I am worried it will eat through anything I use..." One may put in any regular spray plastic bottle. Good stuff. Here is MSDS According to the MSDS for Kroil: 1.) Crude oil (Petroleum Base Oil ) 2.) Naptha 3.) Mineral Spirits (Aliphatic Petroleum Distillate)

One idea is to service the injectors, You been working on the goesintah and also should work on the goesoutah into the engine. https://www.steelsoldiers.com/showthread.php?112670-Fuel-injector-Rebuilding-testing-and-TM-and-compression-testing "fresh diesel" only is in there, that special new...

It is from Wolverinetech.............. It was not $239 when I bought it but it is now. The kit is complete. It is one wire. I took and refurbished to almost new all the grounds and connections. The alternator failed in six months and they sent new diodes for free and I fixed it. Highly...

goto http://www.g741.org/

Individual and vehicle load outs have changed very little from the 50's until now out side of improved fire arms. The document is so large I cannot get it to post. Here is the recommended load out: You need to substitute period fire arms for the ones listed here as some of these were just a...

make bid 500.98, not, even number of dollars, like on the eBay and other places. You could win and go fishing.

Just drive and enjoy and fix, nice truck" What is latitude/longitude?

Being military and shipyard with access to every "freer upper" inside and outside the system, and working on gettin things apart that others could not, and then finding Kroil.... I find there is only one maybe better. Get the acetone and ATF and maybe and add 2% DOT 5 or DOT 3 and have at it...

My original 1969 M352A generator needed adjustment, all froze up. I fixed all that + took it to generator shop where they hooked up my $800 generator wrong and let out all the smoke. Went and bought a replacement, went right in, zero problems, Low cost, Happy.

Let us just crowd-fund one new boot. rustystud can choose which dust boot, prefer zipper boot, send it to tobyS to figure it out and make one, send it back to rustystud to install for trip to Alaska. I'm in.

Is there any of the parts needed in here? https://www.ryderfleetproducts.com/lp/haldex

Comments and photos, and Yes I had a lot of stuck stuff. For this by now I would have ground the teeth out a 10" round jaw Vise-Grips. Very common to machine out to needed diameter lathe chuck soft jaws to get the most grip that can be had. Lock them on the adjuster stud with a pipe extension to...

~convective coolant heater ~ how many watts does one of them use? There is many flavors of these. Could also put a few 12VDC batteries in parallel and an inverter if you need AC out there. This is a old small one of these and it will do 500 watts for quite a while. Could be a solution for power...

Is 86 bucks a gallon now. It went up 6 bucks delivered by Amazon but it been about 6 years since I bought last one. Remember to shake it up once in a while. It is 96 bucks a gallon on eBay. I sent you an email.