Search results

Well you need to figure out where the fluid is going first. If it's not a wheel cyl or the Master cylinder, my gut says air pack. I believe if it's leaking internally you can pull the NPT fitting out and confirm the bypass. I have never had that problem though, hopefully someone who has can...

That's not a bad looking tub. Clinto where'd that come from?

Check the inside of each wheel for a leaking wheel cylinder-leak should be obvious. If there aren't any and no leak at the master cylinder it is probably leaking internally from the airpack. You will probably find the leak though. You bled it at the air-pack first right?

Was the system bone dry or was there fluid in the system? Did it work before? Did you use a pressure bleeder or do it the old fashioned way? There aren't any visible leaks right (aren't losing fluid)? I couldn't get mine to bleed right without the power bleeder.

35K miles in 100 hours, that's got to be the fastest deuce yet!:driver:

One thing to consider also is that TSC sells only coarse threaded products in Grade 8. Most are fine thread on the deuce.

Why get one so far away? I'd look in Ft Mccoy, Craigslist etc....

ouch.2cents

Sorry, but there is no where in GA that is 450 miles to Augusta.:cookoo:

Did you look around for trucking companies? $800 per truck seems way high for 260 miles. I had the M59 hauled from south Florida to 50 miles NW of Atlanta for less than that.

Well, i'll go against the crowd. I had a complete kit, a spare ring, and 32 of the reinforcement plates. I had about 1K in it all. I was really ready to install it till I actually saw how massive the M66 ring is. My dropside cab is perfect and I just couldn't see risking cracking it. (yeah, I...

Well gimp, my answer to that would be that there are ALOT of people volunteering to help and nothing is heard back. Also, I am guessing we are talking 5 people or so at best a day which would take seconds for one mod to make sure the info is correct before approving. Next comment.... Just...

So why not make all new members be "approved" by a MOD. They could check that all the info is correct before becoming a member? Also, the helicopters are Charcoal not Black.:cookoo:

See WM, us airdales don't have these problems!:beer:

I want to see pics of the photographic map reproduction truck that was modified into a camper. It was one of the 3 trucks in Chris (Steelsoldiers) truck swap deal.[thumbzup]

Why not just put city/state so you don't have to look it up?

Has anyone ever seen the really early 8022 or 23s in pdf format or CD's? (since we are talking manuals)

You aren't kidding DH the dual alts are expensive. I was just on Eriks Surplus website and they get over $1700 for a new one!:cookoo:

The yard in La Grange is the one I was thinking too. Pretty good sized but they are just rusting away.

Didn't the HMMVV have a dual 24/12 V alternator? If so, wouldn't you be able to just bolt on with the brackets? Looks good though DUG.[thumbzup]