Search results

I have made several post with part numbers and terminology from the TM so no need to discuss further. I did after looking at the parts break down realize the stabilizer bushings are what had been put in place of the correct parts that consist of these 3 PAOZZ 19207 12419029 WASHER,FLAT...

13 PAOZZ 19207 12378806 .BUSHING,STABILIZER................. 2

For post #170 8 PAOZZ 81860 25952-1 MOUNT,RESILIENT..................... 2

For Post #172 3 PAOZZ 19207 12419029 WASHER,FLAT M35.................... 4 4 PAOZZ 81860 25951-1 MOUNT,RESILIENT..................... 4 5 PAOZZ 19207 12419026 BUSHING,SLEEVE...................... 2

I took those off too cleaned them up and greased them and the key for me was the come along and a punch to get bolt holes lined up.

12417624-12419026-12419029 i will pm you the direct link to the website as i do not want to break any forum rules.

I thought it was pretty easy. maybe because i had the sway bar swung out of the way. I had more trouble with those 3 little lights across the back than i did with that sway bar. i put one washer in slid the bolt in and then from the top slid the other washer on the other side and i could angle...

Also you posted in another post that this generator was blowing out the seal on the oil filter. Keep your threads together gets confusing trying to diagnose in 2 different threads.

nothing like almost 2 months of staring at the truck wanting it to fix itself. Well today the weather was 70 degrees, low humidity, clouds blocking the sun, wife was available and willing to hand me stuff, and i had the right tools. Pulled the rear sway bar off and rolled it down out of the...

Will it start with the battle switch turned on?

Trailer came from Gov Planet, I will take the tire off and try the wheel hopscotch as you sugest

I bought a 2012 New never in service from GP 2 years ago with 5 hours for $4500 and for not much more you could buy a AMMPS 1040 if your willing to go with new technology. In Texas there are a lot of 803a's selling lately that would be a much better buy than this. Even if a good guy like Lite...

So not having much luck in finding readily available parts so i borrowed one from an 803a but things have not gone well with the 802a and i would rather shift gears and go on to the 803a without switching parts back. here is an alternator i found looks like mounting bolts. and wire size and...

I tried the blow gun, i have the regulator turned up but thanks for the suggestion. Unless the military uses slime i do not believe that is it.

Already tried that as explained in the beginning, and yes the air line is plugged in. even tried a different fill nozzle, and ran a piece of mig wire through the hole

Feeling pretty dumb asking this question, but i have a m1102 generator trailer that i got back in december. tire was low so i aired it up before towing home. Trailer has been sitting and so the tire lost air. i went to fill it up with air today and could not get air in. I pulled the valve...

I know this is a 3 year old thread but man this helps me a lot. the Datcon gauges are getting too pricey, amazon has the faria gauge on sale and the adapter

oh i wasn't pointing out as a bad thing i like flappers, just looked awfully shiney and caught my eyes

lets have a close up of the exhaust flapper. Is that Stainless?

Might want to email them first as they are in Australia