Search results

I was going to recommend these & warn of tipping as well. If you're looking for something to just move around your yard & take short trips with. Harbor Freight Tools always has 20% off coupons. Even at it's new cost, it would work well. Harbor Freight Tools also sells a hand trailer dolly thing...

You might have me mixed up with someone else... I wasn't really looking for the insulation. I probably should, but I haven't.

Picked up the generator trailer after work today.

Had an adjustable channel put up front so the trailer will no ride level. No more bucking at a slow stop!

I saw that. The cap I have is new. I have no idea why but it just wouldn't seal. Hopefully the plug does the trick. Not as convenient as a regular cap but it is what it is!

Tinkered a bit today. Taking the trailer to have an adjustable channel put up front so the trailer can ride level. Replaced the constantly leaking cap on the coolant overflow with a plug. Found a sturdy place for some extra oil, coolant, & rags.

Found some more stuff that I need to fix today. :/ Auxiliary fuel pump is no good. Tested as the TM says too. Nothing. Checked the float switch, pump switch & relay... good to go. Found the connector loose for the low fuel shut off. Pushed it together & got a low fuel light! Put some fuel in &...

I put a switch in place for the ground/neutral bond. If it's needed, flip the switch.

Did the load test at 100% today for 6 hours non-stop. Went without issue. Didn't have a smooth idle after taking the load off but it is what it is. Still need to get the fuel gauge going! https://www.youtube.com/watch?v=QOIyTQOPwI0

Rest of the stuff I needed for the fan came in today. Wired it up & plan to test it tomorrow. Thank you everyone for the help! If time permits this weekend, I am going to do an extended load test on it to see if any issues come up. Maybe 5 hours or so at 100%.

Always nice to just use the equipment instead of just working on it. I found a very cheap alternative for the fuel filters in these units. Search R12T on eBay. I got one with a complete bowl for $16.

I changed the oil & loosened the fuel injection pumps again. Made sure they were clean under the shims & what not. Torqued them back up. Ran for a little while & did see oil come back out but I'll need to run it under load for a long while to see if it really did the trick. Got an expandable...

That was my first thought & a good idea but with how I use my trailer, I didn't think it would be the best option. A lot of the miles I drive with it a true off-road. Lots of mud, rocks, & tall brush. I was worried even if it's secured well that a twig or something would grab it & rip it off...

I haven't dug in deep looking, but I found a place to get a custom made tarp. Was thinking of just going the route. EDIT: I am going to have these covers available from now on.

Mounted the grounding stud that I ordered & ran a wire from the ground on the output cabinet to it. Last thing I want to do is get a fitted tarp for storage.

LED bulb came in today & it works! It also works in my 802A. Here is a link in case anyone else needs one. They have multiple colors. https://www.aero-lites.com/product-page/aero-lites-aircraft-post-light-drop-in-led-replacement-for-ge-327-24-28vdc Now, for all the fan parts to come in so I...

Thank you! I found the fan cord & have ordered it. I'm going to use my shop supplies to do the rest. I actually may have the needed connector in my bin but if not, I have something else suitable.

https://www.youtube.com/watch?v=3CmWe0HdqQA&list=UUMyOs-tUsPCnjRSwH2tSR7w&index=2&spfreload=10

https://www.youtube.com/watch?v=YlGIDI5weWw&list=UUMyOs-tUsPCnjRSwH2tSR7w