Search results

I'm always of the take that it is currently not working, so you can't make it that much worse. A dozen donuts walked into an Allison service center close to you yields way more info than you could imagine, likely including a tech that will gladly take the job for cash under the table.

Interesting, thanks. Besides being a mirror image, it seems the dimensions are slightly different. Wonder if that is something somebody made for themselves (their own design and dimensions), or if mine is way off. I was at Findlay this past weekend, and was told by a guy walking around that...

The trans cooler is huge on these trucks. My trans runs cold until the trans cooler actually heats it up, then never exceeds engine coolant temp. If you are driving around empty, I doubt it is reaching 300F. Likely just sender, gauge, or wiring/ground fault.

My writing sucks, but here is what I came up with. The bend angle and length of that bent fin are going to be off, and much longer than the 4.6” estimated. The rest may be reasonably close (?). The rectangular mounting bolt pattern seems to be about 2.33” x 5.88”, approximately. Start with a...

Thanks, take one of your kids protractors too! Also, I just copied the closer up picture into the "Paint" program under Windows Accessories. I remember that program having an X-Y coordinate display at the bottom edge for the cursor, so using the close up pic and the known cross tube diameter...

I'm going to try and have our CAD guy at work scale the dimensionals from wsu's 2-D frontal pic tomorrow, given the windshield total width as reference off my truck, if he has a pinch of free time. That should be close enough to do what I want. Angle will likely just have to be an educated...

Yep. I’m not a CAD guy, so would take me hours vs somebody else minites, who is used to working with such. Offer stands for actual measurements of real plate. Email: detroitdiesel671@hotmail.com include your PayPal address.

$40 offer for dimensionals to replicate, including bend angle.

I don't think anybody that sell or makes/sells them is going to give me dimensions. Thanks wsu. From your frontal pic, I should be able to scale it, simply using one of the windshield frames as a known reference (measure mine). I don't know the bend angle, and it will be harder to gauge the...

Don’t need blueprint level, just approximate of each flat face, the “U” cut out and position, and the bend angle. Example:

Anybody have the LWS (chicken) shield dimensions and approximate bend angle? Looking to make one vs pay $900. Thanks.

Not necessarily, we still have you...

Would like to grab 2 new window regulators for M939 if anybody has available (I think same as M35?). I have one skipping a tooth in the same crank position every rotation. I will be @ Findlay Saturday only, can PM you my cell #. I’m also looking for mounting posts for 2 amber warning beacons...

Renewed all 12 torque rod end links and added retainer plates to them. Details in 5 ton mod forum.

Just saw that. Out of the 12 I pressed out, only 2 were still solid. The rest crumbled at the sight of the press. I was so thankful I did them all. 12 hour job or so. I’d be happy to loan my offset wrench for the upper-center ones, along with a split empty shell to press the old ones out...

Any reason to not take and use the entire engine?

I’m thinking about offering these torque rod ends drilled and tapped, with or without plates. Any interest? Would be about same as vendor price for a stock one.

Relax you two, I just finished the rod link ends like 6hrs ago...

Done. 12 new ends, with retainer plates bolted to all. Very happy with the way it turned out. I’m not the first that has done it, but I am another that did it. Who’s next?