Search results

i wonder how hard it would be to reconnect the tach cable??

i have a hyd driven fan fron a very late model jeep grand cherokee. from the looks of it, it would move an awsome amount of air. of course it would help if you already had ps.

in 15 years of driving all oner the country i have never stopped. for the most part i think they assume you are a military truck. most deuces seem to be invisable to police.

RE: Re: RE: Re: RE: best year to buy well said kenny.........., what was that?

what is the diameter of the crankshaft pulley and what is the dia of the water pump pulley......... i was just guessing, you do the math. bjorn, where does the other 26.5 hp go??

added a web page with much of the same info and some more pictures http://waterloospecialties.webs.com/

removing the fan is to free up hp. can you imagine how much power it takes to turn that fan at 6000 rpm? i would make my own fan from something else. just some simple machine work.

sure but wouldn't an electric be easier? look up the electric used on the trans oil cooler of 5 ton fmtv. it's in the frame under the bed, it looks like it would be a good choice and is 24 volt. i have one but have not gotten to it yet. will, my vote is for air over water since you already...

thanks, john, the waiting is killing me...............

stretch, there is high idle and there is red line. two very different things. we know what high idle is for the multi but where is red line defined??

the 'loud bang' will sound funny also. i once removed an entire piston out the bottom of an engine. (without removing the oil pan)

RE: Brakes with the top off the mc, fluid will squirt out. normal.

70 mph in a stock truck............. yeah, right. and i have a bridge in new york for sale also. that would only be 3243 rpm.......... maybe down a real steep hill for just a few minutes.

on any trips i like to run at 65, but i am a little different...........

the interconnect idea is old, and is made for most rear wheel drive vehicles for towing. i'm sure with a little looking you could find a suitable unit. go here for some good pics of how it is made: http://www.drivetrain.com/remco.html as to the over drive it's covered pretty good in the...

just using one lockout hub is by far the cheapest and easiest way. if you match your tires you do not even need that. spend your money on something really useful like my over drive gear set..................

RE: Re: Help with uh-48 multifuel heater. those heaters are fine when working, but parts are very expensive and low btu output. amphenol connectors very common, mouser or digikey or sometimes evilbay

RE: Re: Help with uh-48 multifuel heater. that is the space heater that is used in vans like the m-109. go here http://www.tpub.com/content/operatormanuals/TM-9-4520-260-13/

the shoe is so cheap new, why bother?

high side solid state relays, 10 pins. 2 different number solid state switches are used, made by ST micro part and available from digikey. 2 VN610 $5.47 and 4 VND600 $4.69 VN610 rated 45 amps and VND600 rated 25 amps each channel. basic soldering skill to replace, (tip: cut all legs, remove with...