Search results

. TM 10629A-OD Marine Corps Systems Command Quantico VA 22134 September 2011 PCN 184 106290 00

. Okay, so just a guess... Maybe you can find a larger zerk fitting for your grease gun?

. Looked on Page 12, and the distribution statement is the same, superseded October 2010

. Good for you - and THANK YOU for driving her at about 40mph. The truck will appreciate you treating her that way. Looks like you are in the group with the rest of us now...

. A SignalStat is a good turn signal device. Comes in 12v and 24v

. Handsome Huey... I went for a ride!!! .

. Here is the Spreadsheet for locally purchased oil (and other) filters https://www.steelsoldiers.com/threads/deuce-parts-quick-reference-spreadsheet.82427/

. Also know that the -10 for these trucks are restricted. DISTRIBUTION STATEMENT -This publication is required for official use or for administrative or operational purposes. Distribution is limited to U.S. Government agencies only. Other requests for this document must be referred to...

. Unscrew the Zerk and replace it? Shouldn't be different - but maybe it got "bumped"?

. If you get a chance, how about updating your location in your account.

. And if you want to help others - you could send us the book when you are done - and I can scan and OCR it to post here.

. Yeow! Dang that would be painful... .

. Possibly start using PB Blaster or WD-40 or whatever your favorite penetrating oil is. I also wonder (memory is failing me) if you need to remove a clip on each axle - inside the "pan" on the rear axle...

. So, you had no shoes on the back of the truck?

. Try adjusting the shoes in on the rear axle. You may have a set of drums that are worn and they won't slide off over the shoes. .

. This is the short version of how you make your own bleeder for brake systems. https://www.steelsoldiers.com/threads/tale-of-two-deuces.209189/post-2451828

. I think you could flush them out without a lot of trouble. Especially if you build yourself a "power bleeder". There would be a minor issue if there is a lot of sand or dirt inside the brake reservoir - but maybe you could replace the master cylinder only rather than all the brake lines AND...

. Is there a reason why you can't re-use the one on your wrecker?

. Have you by chance checked the ground for the lights? Lighting on the HMMWV is grounded through the wiring harness. Where did you put your test leads for Ground? .

http://www.steelsoldiers.com/upload/5Ton/TM9-2815-207-35.pdf I scanned this TM and ran it through OCR so it can be searched. The book came from @WillWagner and the TankLand group. It is currently too large to upload, so @patracy will have to upload it into the spot where it belongs...