• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Rear Axle Differential & Geared Hub Vent Line Question

    Blocked at the hubs is normal, you are pressurizing a closed gear case by doing so. I would splice the cut line and go on with life.
  2. NDT

    Consequences of Failed Interlock – When the Grid Feeds Your (out-of-sync) Generator

    The surge from out of sync connection will cause blown fuse or breaker to trip.
  3. NDT

    51R Battery Hold Down for M151

    That unnecessary steel strap is way too close to the terminals!!!!
  4. NDT

    M37 Lockout Hubs, which exact model?

    You need to look at the Vintage Power Wagon website, they have AVMs for $200
  5. NDT

    SF97

    Title service. Will have to start from nothing. Does your state have "bonded titles"? That's how I do it here.
  6. NDT

    Lmtv no power on push to start

    The trans controller HAS a neutral safety switch in it, in the VIM box.
  7. NDT

    Lmtv no power on push to start

    I would start at the WTEC contol, any codes? Maybe what you are doing is fooling the contol by getting the engine started before the contol boots up and inhibits cranking because of something causing DNS.
  8. NDT

    no power at start push button

    Does it go into gear? Do you have the proper relays plugged into the sockets?
  9. NDT

    no power at start push button

    What year? The transmission controller has to close an interlock circuit to permit cranking. The box that does that is called a "VIM". They are different depending on year. You might want to look at the troubleshooting diagram in the technical manual, which is very helpful with this issue...
  10. NDT

    Where to Sell Trucks

    Put it back on GP. That's where people drop ridiculous cash on these.
  11. NDT

    no power at start push button

    What are you working on? Sounds like a FMTV.
  12. NDT

    M37 Hesitation

    How you gonna look down the carb?
  13. NDT

    M37 Hesitation

    Send it back to Midwest!!! Not rebuilt properly. Not run tested.
  14. NDT

    Bought myself a project! 1997 M1081

    Looks good. I think it went right from a unit to DRMO and bypassed the usual CANN POINT cannibalization we see on the Bragg trucks. I assume you realize your truck is a special airdrop version and may have served with a distinguished airborne unit. Plan on some new MVT tires for the front...
  15. NDT

    M37 Hesitation

    Try with the choke out a little. If that fixes it, carb is still not right.
  16. NDT

    LDS-465-1A Drivability. Will not idle.

    I had the opposite problem, LDT wouldn’t come off idle. Beating on the injection pump fixed it. As low tech as it gets.,
  17. NDT

    M1008 cracked head gaskets, runs fine, fix? Or engine swap?

    That's not fair you changed your picture. I think that is a violation of site rules:whistle:
  18. NDT

    Air Force Blue C700?

    Like this. Yellow font.
  19. NDT

    Air Force Blue C700?

    Use Rapco Paint shade 25045. Under that University of Georgia decal you will find the remnants of the Air Force stenciling, will say: US AIR FORCE FOR OFFICIAL USE ONLY 85-1234 where 85 is the year of delivery and 1234 will be the 1234 th vehicle the USAF bought that...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks