Search results

I did a thread on replacing the check valve that lists a commercial part number.

$2600. Bad tires, cab wiring ripped out, no dash, 82 abn rode hard put up wet.

Not much else. Wehring has a XM474 carrier with that engine, and I have the remnants of a A/S32H-12 aircraft loader that had that engine as well. The engine was called 75M.

Well now that the auction is over, we can talk about the truck per site rules. Did you win it?

Agreed with Suprman, disconnect the inverter, charge the batteries, and verify that no vehicle electrical loads are causing the overload. I have had the inverter burn up on a similar vehicle, not a fun experience. More modern inverters are available.

Looks like it was USMC, has the rear lifting brackets installed. Those are hard to find.

Not seeing anything military there. Lots of school bus seats though. I suspect this is shopmade. Oh and welcome to the site.

Try backing out the studs using the gap for access, using a needle nose vise grip plier.

Better fly down and preview that one. The airdrop trucks all have cracked frames, cracked transmissions, and cracked engine blocks. That is why nobody wanted it to transfer to a fire dept etc.

Welcome. Price is fine. Don't sweat the carb/fuel system issues, these parts are readily available. On the M151s, body condition is everything. You want as little rust as possible. They all have some. Look underneath at the frame channels, these are unibody and things get ugly when rust...

Sweet pic of another 82ABN 3-319 abn field arty M1093 w/w M777 tow rig. I suppose this is at Bragg? If you ever come across the antenna mount dovetail piece that fits between the sugar scoop and the plate attached to the cab, please let me know. The truck in my picture has that same set up...

Current civilian Haldex mentioned earlier finally installed on 915 slick. 916/920 is the same. Unit does not fit too well in this spot, but it fits. Needed a 8" longer piece of 5/8" airbrake tube to get to the tank.

Total height 12 ft 6 in. Not sure where to put it after this truck gets war pigged out, meaning no more roof.

What does the hive think of putting a CREW DUKE antenna on FMTV? This anti-IED EW coolness came about after my time, seems like you only see these on HMMWV and M-ATVs. Anyway, for $26 on ebay I could not resist.

I have axle shafts for the rear axle available, PM me if interested. These are from A1 vehicles.

About all it can be is the PT pump. Time for a rebuild.

See the high speed gears thread, other options discussed at the end of thread.

Welcome. Your only hope for finding the true vehicle serial number or "VIN" is by sanding the sides of the hood and looking for the Army registration number, which on A1's built by Ford, is the same as the VIN. The engine and Budd body numbers cannot be crossed to the VIN. By sanding, I mean...

Welcome! What a find and the price was right! I have tried the property records search to locate vehicle owners as well, except in my case they wanted 20x value. To answer your question, yes, I believe the cabs across the Dodge lineup of that era were the same, but a call to Vintage Power...

I don't think this question has come up before on this forum. I can see why you would want to do this. I suspect you will have to see if the pulley/harmonic balancer and fan is too close to the radiator when you install the engine. If so, the driveshaft length changes are not too expensive.