Search results

Very clean install. Nice job. What trans are you running? Sorry, it's late and I did not read the whole thread. Rick

I judge the M-151's at Aberdeen so I could try to help you out. The problem is that I am not sure I am going to be able to make it and I probably will not know until I get there. I have a lot of stuff to get done before Aberdeen and I only have one day a week to get it done. Rick

Way to man up, I think you know what I was pointing out. End of subject.[thumbzup]

I like the idea of preserving a MV but you are trying to turn one into a Dodge Ram or Powerstroke. I think you would be money ahead to just find a Ram 3500 or F350. That way all the parts are readily available anywhere. Rick

Moving the lower radiator hose will make no difference since the coolant coming out there has to come through the water pump. It will get no lower than the pump ports in the block. If I have time tomorrow I will look at mine to see where they are. I am sure they are the same place as a big block...

I don't know about the height in the truck you are getting but I now someone that was getting four at a time by standing them on end. Rick

MV = Military Vehicle. I like the plate because it comes in handy for moving different trailers that are different heights. I have one with the ball and it works fine. You see, you now have OD (Olive Drab) addiction. You don't know it yet but you do. Ask any of us how this happens and all will...

Tractor supply has the pintle plate but I don't remember if they have the hitch. Just so you know a stock pintle from a MV will also work. I have several of them laying around. Rick

I can tell you that we ran those spacers for years on trucks with 44's and they got hammered pretty hard. As long as the bolts were goodd quality and torqued correctly they were no problem. I did see them come loose on occaision but remember that these trucks were slamming through mud bogs and...

It is this kind of sarcasm that turns people off to this site. I have pointed this out in the past but I always just get flamed. So be it.

I was out for three days last winter during the last storm in Feb. I did not have the 002 then, now I have two of them! Temps here have been low 20's at night, 20 below the average. Rick

I do not think they are behind the mounts, Passenger side should be somewhere near the back end of the starter and drivers side should be close to the mount but in front of it. They should not be hard to find looking up from underneath with a flashlight.

Thanks Ben, I had a post titled "Rough running" that I think I will abandon because this thread is covering all of the bases. Rick

On most of the Ford style relays like that if they have two small posts then one is the feed for the relay and the other is an output to feed 12 volts to the coil for starting or in some cases to bypass an oil safety switch. The relay does ground through the base but it has to be bolted to the...

Treeguy, Do you by any chance remember where the thread is that you were referring to about taking the pump apart? Rick

Joe, I think this thing has become personal to all of us, Once you get it going this thread will become invaluable for diagnosing and repairing a 002. Once it is all said and done I am going to print out the entire thread and out it my generator papers. Rick

The rest is trapped in the block, there is a drain plug on both side of the block. It has been a long time since I worked on them but the plug is below the freeze plugs and offset more to one end but I do not remember exactly where. It will be a 1/4" pipe plug, hex head. Rick

I'm in, just me and my chair. I can help where needed. When do you need money and how much. Rick

Is this the same guy in these two posts?

I know one year there was a shortfall due to some unforeseen circumstances at one of Cabell's dinners and one of the members forked out some cash. I don't think he was going to say anything but word got out and there was an immediate collection to cover the costs. When you consider that the food...