• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    new for me 1985 M1010

    What are your plans for the truck? If you are looking for reliability for daily use and long distance camping trips, suggest you swap over to a serpentine system from a 6.5 Chevy pickup. If you are prepared to deal with that Duvac smoke generator, stay stock.
  2. NDT

    new for me 1985 M1010

    That setup didn’t work when it was new. Go back to Delco alternators.
  3. NDT

    M1088a1 problems

    Get your 915 going! 1000 times more reliable than 1088.
  4. NDT

    New to the stable M936

    Interesting find. The NL is the United States Army registration number. No idea on the bumper tac markings. Looks like this one was excessed long long ago, like in the late 80's or early 90s.
  5. NDT

    Oil leak

    Leave it parked and running at high idle to eliminate the wind blown issue. All Dodges will mark their territory but maybe yours is excessive. Look for a puddle on the ground and follow the drips. Might be the rear main seal if it’s coming from the bellhousing plug. For sure verify your...
  6. NDT

    New to m211

    Looks good! Do you have it apart for paint or do you need parts to put it back together? If you use silicone brake fluid, the stock wheel cylinders will be fine. You have to be careful with the REB, as I understand it, if you are going 55 mph and someone shifts to 1st, it will do just that...
  7. NDT

    SF97 Question

    Concur with Mullaney
  8. NDT

    Original undercoating on deuces

    USMC did apply undercoating sometimes, Army never.
  9. NDT

    HMMWV Doesn't Shut Down With Ignition Switch

    This still does not make sense. The 60A alternator excite wire is switched from the ignition switch. It would not have 24 volts with the ignition switch off.
  10. NDT

    M1165 Won’t Accelerate, Feels Like It’s Slipping

    Did you try high lock on the transfer case? Sometimes these have CV axle problems that resemble slipping.
  11. NDT

    USN Bath Unit, Trailer Mounted

    Do a search for "Beckett burner", you will need to retrofit something newer than 55 years old.
  12. NDT

    Gunny Has New Boots

    Those look AMAZING!!!
  13. NDT

    New HMMWV M1097R1 Guy Has Questions

    Big round thing is power steering remote reservoir. You have V belts so you will have the old design GM pump with integral reservoir.
  14. NDT

    New HMMWV M1097R1 Guy Has Questions

    Wow GP getting sloppy, usually every bit of radio stuff gets stripped out. Power steering on these is a pain, you must follow the TM procedure to get the air out after repairs.
  15. NDT

    4L80E error code 73 - trans light always on

    Supplement 7 sez: DTC 73 will set when return amperage varies greater then .16 amps from commanded amperage. ME: The amps sent by the TCM can vary from 0.1 to 1.1 amps. The amps in the return wire are out of spec. You must figure out why. Supplement 7 sez: Diagnostic aids: Check for...
  16. NDT

    A Tale of Two Fuel Tanks...it's a tankless job

    I do believe your new tank is from a M39A2 series truck with multifuel engine, that has the electric lift pump in the huge hole.
  17. NDT

    4L80E error code 73 - trans light always on

    So now all codes are gone?
  18. NDT

    Need to know size of Allen head screws that holds fan on ASAP

    5/16-24 x 1.5"
  19. NDT

    XM708 dashboard plates

    Wow you be OG in this hobby. Tell us (maybe in your other thread) how you bought this back in the day.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks