• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    M37 Mystery Problem

    No ideas here but what I would do in your situation when it won't start is to remove all 6 spark plugs and reattach the cables and see if you have a nice blue spark at all 6 plugs.
  2. NDT

    Buying a m105 tomorrow anything I need to know before the purchase

    As founding member of the M105 trailer haters of America, I will encourage you to pass on these pain in the butt trailers that have these crappy qualities: Can't back them up worth a darn Hitching up with the first generation landing wheel requires 4 people They are too high to put anything...
  3. NDT

    Heavily modified M715 questions

    Yup GM axles from the M135 or M211 deuce cargo trucks. Those locking hubs are also available but very expensive. Not really sure why anyone would want to use those axles on a M715.
  4. NDT

    Heavily modified M715 questions

    If you have the old school 6 lug wheels you have the Dana 60/70. Pictures will help a lot. The locking hubs for the factory axle are available but not easy to find.
  5. NDT

    Buss bar blues

    Any time you have dragging starter on CUCVs the first thing you should do is feel these buss bar connections for heat after cranking a while.
  6. NDT

    GMV head gasket

    You started with a GEP engine and STILL had cracking issue???
  7. NDT

    M51 removing brake drum

    Bearing has no grease!
  8. NDT

    M38a1 loss of power backfiring

    Carburetor flooding sounds like. Float needle gets stuck open with trash in the fuel line. Mine used to do that until I rebuilt the fuel system end to end.
  9. NDT

    Talk Me Out of My Fascination With Owning an LMTV

    My LMTV came from Bragg and I would buy another from there any day. They tend to run them until something simple breaks and then off to GP.
  10. NDT

    M925 Over weight boo boo - Transfer Case Won't Engage

    5 ton trucks are rated at 10 tons on highway so an extra 4000 lbs ain't squat.
  11. NDT

    Tired of the EUC delay BS...

    "HMMWV DIY: How to stress out over things you have no control over!!"
  12. NDT

    1986 M998 HMMWV Dead Rear End

    Teeth, shavings, ground up metal
  13. NDT

    1986 M998 HMMWV Dead Rear End

    You are about to buy a rear differential. Drain it to see what comes out to confirm.
  14. NDT

    1986 M998 HMMWV Dead Rear End

    Please do this: Put it in H, rev the engine, report back if the driveshaft or either brake rotor or halfshaft is spinning.
  15. NDT

    1986 M998 HMMWV Dead Rear End

    So simple. Put it in H rev it and look underneath to see what is and is not spinning.
  16. NDT

    New M1123 Owner intro and question

    Both heads open to rain means you have an infamous Albany swimming pool engine.
  17. NDT

    Water in transmission

    Yes so the value of his truck is $7500-6500=$1000.
  18. NDT

    Some 0-50 runs and driving around town in the 1952 M211

    Runs like a swiss watch. Thanks for posting. So deactivating the rear rear axle didn't help at all. As long as you have matched tires, that would be my guess.
  19. NDT

    M38a1 engine popping from exhaust, now backfiring and no start.

    I would start with a compression check. Sounds like valve problem.
  20. NDT

    M38a1 engine popping from exhaust, now backfiring and no start.

    Is it continuously or occasional? Occasionally they all do that.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks