• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. NDT

    Steel Soldiers for Dummy needed

    To the best of my knowledge, nobody has written a thread on replacing the door window glass, which is why you can’t find it. The TM may discuss it, but if you remove the inner door panel, you will see how the window tracks unbolt, allowing the glass to be removed.
  2. NDT

    Couldn't get 5-ton started on the trailer.

    Make sure you document and photograph all the things that are wrong with your “Ironclad assured” running truck so you can file a claim or lawsuit like so many others have done.
  3. NDT

    Couldn't get 5-ton started on the trailer.

    You ran it on either long enough to build air pressure? What’s that, 2 minutes?
  4. NDT

    Couldn't get 5-ton started on the trailer.

    Grab an air line and charge the air system so the brakes will release. The driver should have an air hose. Charge through the front emergency glad hand. Pull off w pickup.
  5. NDT

    Advanced Electrical Diagnostics Needed M1078

    Oh yes! The conductivity between the cables on the 12 volt diode stud would come and go with temperature humidity wetness etc. The corrosion from the heat causes the connection to become a “semiconductor” of sorts.
  6. NDT

    Advanced Electrical Diagnostics Needed M1078

    Yay! You have found the original problem that the Army never could, that caused this truck to be a hanger queen. Most certainly this problem is over. Good work!
  7. NDT

    M1078 1998 model

    Very unfortunate situation but it is repairable. Two cables in the battery box go directly to the slave receptacle. They do not need to be connected. The negative cable goes to the “shunt” under the hydraulic power unit near the spare tire. Both the 12 volt and 24 volt cables go to the...
  8. NDT

    Power steering leak

    The hose connects directly to the hub on the clutch.
  9. NDT

    Power steering leak

    Nope. Not normal. HMMWVs are not supposed to have qds anywhere. Get rid of it. EDIT: I have been corrected on this, later model HMMWVs DID have this qd from the factory. Sorry for the misinformation.
  10. NDT

    M35A2 engine rebuild?

    Maybe all you have is a problem in one cylinder. I would do exploratory surgery first.
  11. NDT

    Advanced Electrical Diagnostics Needed M1078

    As usual we need to know what year model your truck is. Do you have LBCD? Have you done the diagnostics on the CE Niehoff website?
  12. NDT

    M37 no power, good idle

    From tank TO carb or INCLUDING carb? What vacuum readings are you seeking at various rpms? Does pulling out the choke partially help?
  13. NDT

    WHEELS: LMTV vs. M900 Series?

    Simp did that wheel blow up on your 915?
  14. NDT

    Finally After 13 years I have purchased my first M1009

    Good looking truck! Thumbs up on tire choice, that's how I went too!
  15. NDT

    Anyone know where to get these clamps??

    Yup those are from fire truck application and are pricy! Pactoolmounts.com model 1004.
  16. NDT

    G7117 Axle questions

    Yes this truck is not like your 5 ton where all the drive shafts spin the same way. Does your rear axle have the tic tac toe pattern on the cover? If not it’s wrong. 6bt won’t fit in the engine compartment, maybe a 4 bt will. The stock transfer case might be able to handle 200 hp, I...
  17. NDT

    LMTV picture w/odd wheels

    Good to know now my reason for not wanting a set is gone
  18. NDT

    LMTV picture w/odd wheels

    They look cool but if you get into mud they will be very difficult to clean on the inside.
  19. NDT

    LMTV picture w/odd wheels

    That already happened 5 years ago. Someone had them on ebay for about 6 months. Army never put them on trucks.
Top