Search results

Trying to swap my 400 to a 200 and got the new one in with some shipping damage. It had worn all the way through the packing materials and box and looks like it got thrown around a bit. The shroud is bent but not interfering with the fan. Also had the idea to just swap it with the shroud on my...

I was beginning the process of alternator removal today for a few different things, but before I could even get started on that I got stuck with my belt tensioner. It's supposed to have a 3/8ths hole to use a socket/breaker bar on, but mine looks like this. The edges of the hole are rounded...

I have a truck that came without mirrors or any holes drilled for them. I recently got a mirror kit in and learned about the two different mounting positions for the driver side mirror. The mirror head I have does not have the cut for the lower position, but it did come with the lower bracket...

I have an M1114 and recently found that my tcm has a bunch of burnt out components on the board. The part number listed in the TM for my truck is the same as a GM part used on 6.5 turbo trucks with the 4l80e. If I get one of these units and replace the EPROM with the one from my TCM, will it...

My truck came with no front composite lights and a flasher unit removed with the cable cut before the connector. I just got finished putting on all the parts and wiring everything back together but the turn signals are not working. The first time I turned the right signal on it worked front and...

The resistance between the outer connections of my truck (1114 if it matters) is 85 ohms when on, and 30k ohms when off. Are these figures normal? the relatively low resistance when off seems wrong to me. Background: I recently put my batteries in again and tried to start it but had some...

As I've been working on my truck I've noticed a few cut cables that I haven't been able to figure out with the wiring diagram. 4 small wires coming from the outside negative battery terminal. These don't seem to be in the wiring diagram 1 wire coming from the outside positive terminal. also not...

I've had my truck for a couple weeks and have been opening and closing the rear hatch without any issues aside from it not having the gas springs in. Today I closed it normally, and when I tried to open it again I get no movement. I've looked at the mechanism from the inside, and the movement...

I bought an M1114 recently and am now waiting for EUC. I've been looking at my windowless and mirrorless frame, and trying to figure out if things will fit. The mirrors mounted to the armor so I know those won't fit, is the solution just to drill new holes in the frame? Or are there aftermarket...