Search results

How to clear palmettos.

Howdy All, Just to let you guys know, I have been spreading the MV hobby around Daytona Beach. No, No, I don't just walk on the beach, and drink all day. (Just most days).. Anyway, thanks to: 4x4 Forever, hndrsonj, timntrucks, wsucugarx, cornrichard, jimm1009, and everyone else. Without the...

Just skimmed through Dave's site, I didn't see one on there........ However, I got a perfect "used" od cover from him in Janurary. Might be worth the cell minutes to call. If Dave doesn't answer, he will call back within 30 minutes... MHO.. http://www.easternsurplus.net/duece_spares.html

I only have two neighbors on the other side of the street. Woods on both sides of the house. I looked into the laws about the truck months ago. I only found one that says no trucks over 1 ton, in the driveway for more than 48 hours,which does not make any sence. :confused: The cadillac in the...

You, Sir have a GREAT wife, and a good truck!!

NAPA Part #3511 will be the one on the right! I have one, but have not changed it yet. Thanks for the idea of open ended wrench and spin on!!

Howdy All, Been off line for a bit, making the final move. We arrived last Thursday evening, and are in thr process of unpacking, and getting the house in order. Friday was a such a wonderful day, we had to stop "work", and take 'her' for a drive on the beach. The wife, dog, and I went for...

No, I never get under her when she is running. I "think" there is a zert for the throw out bearing. I may have missed that? When I get some time next week i'll do some scopeing around! TY

The stuff I got was Truck Bed made by rustoleum. It slides like the orginal bed, bud doesn't scratch away. I'll snap a pic in the am after the move I made!

No, I have not. Thanks for the info, for I was courious what that plate was when I was tighening every bolt and nut in the area. So, then I open the inspection plate, would it be obivous what I'm looking for? I have not run across that in the tm's. And Thanks for the quick responce!

Thanks to all for the concern. I do have to report, that I THINK, I have the noise narrowed down to the clutch. I do not hear the noise when she is cold. Once I am moving down the road, after 5 minutes, the gringing starts. When stopping at a light, depress the clutch, and it sounds...

Just to give you all an idea and cost, I thought I would share how I fixed my bed. First, i started off by knocking the big chuncks of rust off. I used the sander and a scrapper. You do not have to go too far, just get the bubbled pieces off. Then a coat of the Rust Treatment, I got at Sherwin...

Guess the site was down last night when I tried to post this. Could't wait any longer, sleep was in order. Sorry for the delay. Forgot the oil housing, And the ONLY vehicle I could have passed, but just slowed down. Kinda blurry, but she ran about 185 in the heat of day, and 175 at night...

Had some company over, then unloaded the truck, time to spool down. After the advice and tips when I started this thread, went to check her out. I did find three bolts loose from the drive shaft to T-Case, only about a quarter turn. Checked all the bolts on the U-Joints, tight, and found some...

Forgot the pictures

Made IT! Just letting you all know I'm home. I even stopped by the beach for some pictures before pulling in the drive. (Only a bolck and a half away). So thank you all for the support, advice, and offerings of help, to someone you don't even know. Just shows how great ALL of you...

Found three bolts loose from the drive shaft to T-Case, only a quarter turns worth though. Also there is no breather on the trans, just an allen set screw! Hmmm? Well, I'm off Hope to report good news Thanks all

Good Morning, I found the breather for the T-Case, looking foward, top left, Very dirty up there and it was stuck. Loosed it, will see what happens. I have a feeling the damage has been done. No leaks from the T-Case, or anywhere else on the ground.:-P Gona head out and see what happens...

Well Plan B may come through. Just got a bid offer for $1200 to trailer her the rest of the way. Just about as much as I paid for her:confused:. I read AFTER I bought her, It's not how much she costs, but what it takes to maintain her.. I'll have to sleep on it, Thanks for everything...

The trans does not leak at all, the T-Case was leaking, and still leaks at the u jount connection, if that helps?