Search results

link please?

your right, i couldnt wait, i just went out there and looked with a flashlight and is the actual block. good news is, i already found a new block for free, its in anchorage, about a 6 hour drive, but its worth a shot i think. even if the block is junk, at least i have some scrap metal to make a...

there was no brace, i didnt even think to look for a spot to mount a brace (due to the low light)

you know what i just thought about? i didnt get a chance to work on the 09 today (working late), but doesnt the starter bolt onto the bell housing of the transmission? i could be wrong of course, this is my first diesel and first GM but some of the rwd vehicles ive worked on, the starter bolts...

i agree its a bum deal, but no need to cry over splilled milk i guess. maybe i should just put in a 350 haha. i will try to post some photos tomorrow, thanks for the replies

ok so i just purchased my 86 1009 and had to put a starter in and in my haste to get it running (plus no light outside), i failed to notice the portion of the block the outer bolt screws into was cracked and jb welded back on. :evil: That portion has cracked off and is now missing as well as...

thanks everyone, that link was very helpful. I need to do all the fluid changes here soon. as for the cucv, the speedo says 14,xxx but it doesnt work. im assuming its just a speedo cable but not too sure. the brakes feel very spongy, the steering seems pretty loose and the suspension is worn...

thanks for the input, i want to ****ch to 12v because im used to regular vehicle on 12v, it seems like it would be easier to work on, but im not too sure. what are the pros/cons to switching to 12v?

hello all, i just picked up a 86 M1009! it cost me $500 because the starter was out, well i swapped that out and got it running yesterday. basically i am looking for suggestions on how to refesh the motor and suspension, switch it to 12volt, find a place to get a new rear roof with the glass...