Search results

I sprayed some aero-kroil into the cylinders and going to let it set a few days. There was even some clean oil in the top of the head. The oil in the pan was nice and clean as well.

It has not been cut but the motor will not turn by hand. I'm hoping that I can free it up and not have to rebuild the bottom end. Under the valve cover looks new and the cylinders are very clean looking with a scope. Any ideas on where to find a complete wiring harness? All the ends are...

Here are some pics now that the layers of muck and pine needles have been removed. Only one data plate left on it and it's pretty hard to read.

Rescued this from the junk yard yesterday afternoon. Seems to all be there but has been setting outside for a while. Fuel tank completely filled with rusty water and a good amount of body rust. Hopefully this will be a good project for me and my two boys. I think they are more excited then I am.

Tell your Dad "Outstanding Job"!!!

If you can't find anybody else, i might be able to run up there one day and snatch it. How long would you need it stored for?

"Welcome Aboard" from a neighbor to your south!!!

The springs off the 99 and up trucks are longer and are supposed to give both a little bit of lift and a smoother ride. As far as the flip goes all you need to do is blow out the bottom of the the perch and flip the shackles. I usually weld a piece of angle over the top for support. Here is a...

All of the flips that I've done with the stock parts only gives it about 3-4" plus it rotates the pinion up a little bit. It does require a torch and a welder though. The hardest part is just getting the shackle bolts out.

I swear I saw your truck setting in our parking lot at work today (CAP). Lifting these body style trucks is so easy. Never buy any lift kits or springs for these. My friend and I used stuff from out of our lot at work to lift his square body 14" and mine 11" all suspension. I can't stand...

Looks like you got a nice trailer and had a great family trip as well. You can't ask for more than that. :grd:

Welcome Aboard from down here in Va.

Welcome from Richmond, Va.

They have them in Maryland a couple times a year.

:doh:

I've had a 10 bolt in my Civy K5 with a hoped up 396 BBC on 36's for about two years now. I have put it through its paces and it has held up great. I do have a Dana 60 and a 14 bolt behind the shed for the day the 10 bolts take a dive.

Nice truck....Good job sir!!!

Worst mistake I ever made was selling my brick bender....

I've seen some people put roof mount a/c units on the hard tops before. Texas Truck A/C, truck, off-road equipment, crane air conditioning installation, service

:ditto: The guy that runs that site has a ton of good info.