Search results

My seat was as hard as a park bench.

While your at it, you can put some foam in the seat. Your wife will appreciate it. I had the foamfactory.com cut me a piece to size. My wife enjoyed the ride much more.

In pic three, is that a boot clamp hanging from the axle? I always like cheep fixer uppers.

I think they are 7/16 fine thread on the bottom. Mine only had one bottom bolt. Be carefull when you tighten the back bolt. The Alt. and the block mount had some slop on mine with about a 1/16 gap on the back between the Alt. tab and the mount.

fsearl91, I found them at a place called oringsandmore.com for $3.80. I also think Grainger has them.

Duce, I've got a '79 4wd f250 I'm working on now. PM me if you get it and I may get a few parts from you. DUCE, ALSO KEEP A WATCH ON THE STORMS THIS MORNING

Welcome, Its good to see another Hoosier.

LH, I tried the link on another computer and it still didn't work. Its a link to his website. Im not sure if its the website or its being blocked at work. Sounds like your almost done anyway. Good luck and be safe. Jarred

LH, mikw did a great how to in a thread a while back. I think it was just called hub flip. This computer a work is slow and I couldn't get it to come up but check it out.

Hi all leroygreen from southern Indiana. I joined a while back to learn all I could before getting a Deuce and just never intoduced myself. I have learned a ton from the site. Thank you to the site and everyone that has that has offered help.

Welcome, The most important thing you can get is information. Do your reasearch. In Springfield Mo. make sure you get a heater. Have fun and take your time and check your truck out from top to bottom esp the brakes. Make sure you have some extra cash on hand after you buy for brake work and...

Progressive and geico also would not even give me a quote. I also went throgh state farm and pay only $33 per month. Searching this site when I got my truck gave me lots of leads. It must be an Indiana thing with progressive and gieco.

GL told me I would get a Florida title but an Arizona title showed up.

Thanks runk for attaching the pages. I didn't have time to figure out how to attach them.

The kits I got were like the ones that 4 X 4 Forever shown in the Civy Wipers link. Get some pics if you can.

If your talking about the wiper arm upgrade, I didn't have to cut mine off. The knurls I got were different thickness. Put the right knurl on and then the nut that came with the wiper arms. Go easy on the wiper motors when tightening the nut.

Here are the TMs I found to put my front cover on. TM 9-2320-231-20 14-18 TM 9-2320-361-34P fig. 258 The -20 shows where to put the springs.

Deuceswild, I just did the same thing with flashing. It worked great.

If you get it make sure you grab whats left of the troop seats in pic #2.

I have seen this done on an old gasser Deuce. It was a mud truck with a blown 454 and 400 turbo. The rear half of the leafs looked like they had been torched off. It looked like a weird setup but it worked for him.