Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
You are right that is not the right one, here is the right one Baldwin p/n OB1368 and the oil filter is wix 51970 or Baldwin B96
I have been using them for many years now.
I think I took the fitting off and drilled and taped a 1/4"pipe hole. I have tried to find photos of the work and I can not find it.
Good luck with it.
When I first got my truck the HD motor on the crane was leaking. I had it rebuilt and after I started using it started leaking again. The shop said I needed a case drain. The motor I have is made by Parker. I put a case drain on it and ran the line over to the HD tank, I also put a one way...
Here is what I have and used on my rebuild.
Oil Pan bolts 40 lb-ft
Intake 30 lb-ft
exhaust bolts 25 lb-ft
Rocker box covers 15 lb-ft
Rocker box bolts 65 lb-ft
Head blots 25 then 100 then 200 then 305 lb-ft
Rod bolts 75 then 150 loosen then 30 then 75 then 150 lb-ft
Crankshaft Main 140...
I just rebuilt a NHC250 and have all the torques valves, if you let me know what you need I can send them to you. A repair manual is very hard to find, may try Ebay.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!