Search results

Sold to a friend and he added a Hmmwv bumper and spare tire carrier.

The wipers from a Freightliner Classic or FLD #18969 78 are 15" and fit just like originals. About $11 ea.

Well I just got my non runner with 15 gallons of water in the engine. If anyone is looking at buying a a non runner plan on rebuilding the engine. Gov planet will do nothing for you.

Anyone have the belt number for an MTVR? Thanks

Yeah just in case I can't get it running I'll need to haul it. I'm just trying to find actual height of roof without stack. TM shows 141" just under 12' but stack looks to be 12" or more over the height of roof.

It shows 98" That's the height with top folded down. I know it's taller than 8' with roof on. But thanks anyway.

Anyone know the height of the roof of the MK23 Mtvr? The t.m. says 141" operation height but that's with stack and air intake.

https://www.steelsoldiers.com/showthread.php?176113-Serp-belt-drive&p=2103522&highlight=#post2103522

I agree with Patracy. Been running MTR's on 24 bolt hmmwv wheels for a long time without run flats. I used ether to seat beads to air mine up.

Need a Hmmwv moved from South Boston VA 24592 to Zion IL 60099. Anyone interested shoot me a quote.

Wish I saw that. Would have saved a lot of time.

Didn't see one.

This was my vacuum pump fix. Most of the parts store discontinued selling the vacuum pump for the Cucv's. I found NOS ones for around $150-180 + shipping but didn't want to buy one with a 30 year old rubber diaphragm. I searched vacuum pumps for all other makes and found this one. It's for...

I saw this on gov planet a few months ago and was wondering if anyone has put a Hmmwv 200 amp alt with serp belt drive.

I've got a 6.5 gep turbo take out I would sell.

Yeah a little bit. A 6" lift would most likely clear the 37"s but I didn't want it that tall.

Added a 4" lift and Hmmwv 37's.

There is a guy on Ebay selling new M101a3 trailer axles in Santa Clarita, California for $350 ea. They have standard 8 lug pattern. Not sure if it's a direct bolt on but I would think it could work. eBay item number: 272260256051

The variable rate spring is on the left and stock M998 on the far right. You can see how much bigger the variable rate spring coil is.

https://www.steelsoldiers.com/showthread.php?158875-Putting-my-M998-back-to-a-M1025/page2&highlight= This was my old Hmmwv. I swapped out the M998 springs for the 10300lb springs. I didn't change the lower control arms. The reason I did not use the variable rate springs is I didn't like the way...