Search results

RE: Re: RE: Re: RE: stalling now no start Well finally got the truck running and wanted to give all of you an update. The lone culprit to my no start problem was fuel line related. I replaced the lift pump and rebuilt the ip. The rubber fuel line when it goes from metal to rubber by the tank...

ok all thanks again for your help and responses. Pulled the switch out and tapped the hole and put a plug in it. Decided to start putting everything back together, mount fuel filter and reinstall ip cover. Wouldn't you know I snapped one of the ip cover bolts off. As luck goes its flush into...

Has anyone added a spin on style fuel filter to their m1008? I was looking to replace the box filter on the firewall and use just a spin on filter. I would like to do this without running an electric pump. Any thoughts or experience with anyone who has done this? thanks for the help.

I put Herculiner on my floorboard. Keeps noise down inside the cab and helps with water causing rust issues.

welcome to the family....this site is great full of knowledge and all the help you could need with your m1008.

RE: Re: RE: stalling now no start Ok sorry one last dumb question. After tapping hole and adding screw do I put the switch back in or leave it out?

The ground is a good spot to check. I reground mine and all fuel guage problems disappeared.

RE: Re: RE: stalling now no start After I remove the switch would it be best to tap the small hole and add a screw??

RE: Re: RE: stalling now no start Thank you so much for the pics!!!! I will take the base off and start there. Once again thank you all for the help.

Can you give me an idea which one is the pressure switch and how to fix it? I was confused when I had to disconnect three connections. Pics would be great but i don't want to be greedy. Again thanks for the help! :?:

Thank you all for your responses and help. I bled the air out of the system pulling the pink wire on the ip and opening the bleeder valve on the filter. I found a bad fuel line located by the fuel tank and replaced it. Once I bled the system it starts right up and runs for approx 5-10 mins and...

I appreciate your response I will check all these on Monday. I changed the fuel filter two months ago. I did notice it seems kind of wet below the fuel filter area against the firewall, so I am going to start there. Not to sound stupid but the ip is located behind the water pump correct?

Well here is my sttange problem. I have a 1986 m1008 with 31k. I started it the other day as always, when I left the house it stalled at the bottom of my street. I eventually got it restarted and drove for about 20 min. until it stalled again. Took a while but eventually it started again and...

Ok I will check take the door panels off and check. Thanks for all the help.

Sorry I should have clarified. I can put the key and turn it to the lock position. When I try to turn the key to the neutral location to remove the key it unlocks the vehicle. I bought new door locks and replaced the old ones but still have the same problem. Which led me to believe that...

First time post. This is an excellent site. I have a 1986 M1008. My question is has anyone tried to convert the door locks back to working order and if so how? Thanks for the replies.