• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Search results

  1. lindsey97

    tranport bicyle from Coralville Iowa to Wynnewood, OK

    Y'all should be able to handle this one...……. Purchased a 27.5" mountain bike on ebay, seller can ship, but I wanted to see if anyone was headed south thru Iowa and could move this closer to me, or possibly deliver to me for fuel money. Tires come off without tools, and it only weighs 32 lbs...
  2. lindsey97

    M1082

    Haul anything I can get in the bed. This was a sewer line project that I completed in Spring of 2017, 2200 feet of 8" SDR. If I can ever get anyone to build me a set of ramps that are easily dealt with by hand, I will haul my Jeep TJ in the trailer, and dirtbikes/Yamaha Grizzly.
  3. lindsey97

    2nd 12v alternator on nhc 250

    I bought one of the pyle converters, input is from my slave plug on passenger side with long power cord to the pyle. Output is a 12v cigarette lighter plug with 6 ft. of cord. Mine was $17 on ebay, but is only 5 amps. All I plan on powering with it is charging my phone, or powering my Garmin...
  4. lindsey97

    Another ill conceived trip - 1500 miles in a HMMWV. KS to the FL/GA line

    Oh Gimpy you went and stepped in it that time.....I'm gonna tell her.
  5. lindsey97

    A M931A2 Story

    One thing for sure with this situation: Nice guys finish last.
  6. lindsey97

    M939 NHC240 Fuel Delivery Issue

    Probably the fuel line in between the filter and the injection pump. Will not show leaks or wet spots. Will lose prime, not start, and finally won't run. The line dry rots, has very small cracks, which allows air to enter and the system won't stay primed. Replace the line.
  7. lindsey97

    forgive me for i have sinned !

    Hope you get to go home soon and are feeling better. God bless you Guy.
  8. lindsey97

    2018 KAMO Rally Oct 5th-7th (Kansas Arkansas Missouri Oklahoma)

    Guessing the bridge is still out. We may have a truck on towbars, good to know.
  9. lindsey97

    breaking free stuck lug nuts

    Read all 9 pages of this thread. Got me interested in the Milwaukee fuel series of tools. Have seen a lot of 1/2" fuel impacts in use and everyone raves about them. Couple years ago, I bought a Dewalt 1/2" impact and a Dewalt cordless 18 volt grease gun, since I already had Dewalt 18 volt...
  10. lindsey97

    Cummins PT pump tach drive question

    There may be a thin brass adapter/bushing to make different sizes/style of cable compatible. did it fall out, get left out at pump shop, or is it stuck on the end of your cable?
  11. lindsey97

    Help Finding Orings for MRAP Tire Valve

    Probably a 1/8" or 1/4" npt scrader valve. Take assembly to a plumbing store and figure out thread size. Looks like 1/8" npt. Then get on ebay and order correct scrader valve assembly in stainless. They make brass or stainless. Same part as on a paintball tank, scuba tank, or dirtbike shock.
  12. lindsey97

    Burning Man Flambe' 5-Ton

    Feel bad for them. Appears to have been an A2.
  13. lindsey97

    No reverse on my M923A2

    Allison C-4 rated oil which is 10wt with correct additives. Oreilly's premium green bucket 5 gallon pail, pn 74209. Plan on needing more than 4 gallons or whatever the dash placard says, they didn't take into account for the cooler, hoses and filter capacities.
  14. lindsey97

    No reverse on my M923A2

    Take your external filter off (the one under hood passenger forward of trans). Cut it open and inspect pleats in filter for residue/debris. You can also send a fluid sample off to be tested for content and condition of fluid. It's most likely the clutches if Allison has tested it. The...
  15. lindsey97

    No reverse on my M923A2

    Have you checked your governor filter on the very back of the transmission?
  16. lindsey97

    No reverse on my M923A2

    I have no A2 experience. Wish I had an A2. Think I jacked the front axle up on passenger side 2-3" in order to get the trans/jack combo to roll under the toolboxes. Didn't expect that. Mine is an A1 nhc250 with 14.00-20 supersingles. Yes definitely get all the torque converter bolts started...
  17. lindsey97

    No reverse on my M923A2

    Well.....Simp is just a bit faster than I am. It is as easy a 4x4 1/2 ton truck if you have the correct jack that lifts to 32.5" -35" in height. You can let the air out of the tires if the jack won't go high enough....BUT get the trans on the jack and underneath the truck first. I had a...
  18. lindsey97

    (3) medium towbars from Oklahoma to New York

    We still have 3 towbars at 98G's house in northern Kansas that need to hitch a ride to NY or somewhere in between. So if anyone is coming to KAMO from the east, we would appreciate the help getting them moved closer to NY.
  19. lindsey97

    mep-831a pickup/storage/transport

    Looking at a MEP-831a generator in Aurora, Ohio. Would need it stored or hopefully sent along the SS express. Willing to pay for fuel and expenses. End destination would be Wynnewood, OK 73098 or a freight shipping dock at OKC. Or I can possibly meet for handoff somewhere along your route...
  20. lindsey97

    GMTK AND SGMTK where are they all?

    There is a GMTK listed for sale on OKC craigslist.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks