Search results

thanks, sounds ez enuff.. I cant wait on the solenoid to come in, ive been working on getting her running. When i bought my current m1008 i was kinda scared she might not come back to life without a donor heart(motor). lol. but with what ive seen im pretty sure this solenoid is why the PO...

I ordered a new fuel shutoff solenoid since my wasnt working. When i install the new is there anything special to putting it back together? With the way the arm is made i just wanna make sure theres not a certain postion or such when installing?? thanks in advance

1 more question guys.. earlier in thread i mentiond starter bolt issues, the PO had broken & then tried drilling em out. So. i retaped the hole closest to crank since it was to badly damaged. But i had to drill out the outside bolt hole an use helicoils to repair it. It is holding pretty good...

FYI: After some digging i found the original GM part number 15577535 Injection frame kit with arm solenoid, aldo interchanges with 14067411 & 26214. From what i read its the same for the cucv or civy. Also the other solenoid in the housing is the fuel meter solenoid GM Part # 15578218. I...

Do any of the normal parts stores napa, oriellys, etc carry the Fuel Shutoff Solenoid?? Was hoping to get it before next week... lol

ok guys, y'all were right. the shutoff solenoid seems tobe my problem, i removed & tested it. after cleaning it i got alil movement, but its gotta be replaced. does anyone know the part number for it and does any of the usual parts store keep it in stock? Thanks again for the help

Skinny, ive noticed several items on this mv that need a rebuild. lol. at this point im jus tring to get it running to find out what kinda shape motor & tranny is in before getting to deep. this isnt my first cucv, i was spoiled by my first m1008 it was spotless with 32k miles. i got it years...

Sorry, i didnt know if it would get any attention here. Skinny, thanks for the info. I hope the solenoid is the issue and not the pump, ill find out tomorrow.

Thanks i'll try both of these tomorrow. So are the injection pumps not bad for going out or do they not go completly out? I was kinda getting the idea it might have been the pump just because of the condition it was in when i got it. Whoever was working on this truck before had removed starter...

Previous owner had already tried rethreading i guess, so i used helicoil an it seems tobe holding. But honestly i havent put much strain on it yet. Ive ran into more issues, i think my Injection pumps bad cuz im not getting fuel at injectors.

Hi Guys, Im still fighting with the 1984 M1008 i recently purchased. When i got it someone had already made a mess of things, but im slowly getting it put back together. I dont even know if the truck was running before, so ive just been getting basics pieced back together, i got electricty &...

Thanks for the help Warthog!! I have to say this is a great site, it has all the info an help anyone would ever need or want!! U guys know your s**t instead of. like alotta other forums where there is a bunch of know-it-alls that really dont know jack.. thanks again!!

im using a BWD GPR1 from oeilleys, it mounts through rubber looms so i dont think its a grounded unit.. Thanks for the help

Still working on getting my recently purchased m1008 running. Ive saw lots of threads bout GPRs, but havent saw a specific thread bout using the civy version. I picked up the GPR from Orilleys for a 84 Chevy K20 with 6.2, i was gonna use the napa GPR109 but local napa was out of em. Ive saw...

thanks guys

quick ? Which is the inlet on the factory filter assembly on my M1008? thanks in advance

Thanks Guys, i have used the torch method in the past on old tractors. But i hadnt thought of it on this, its been years since working on em. I had also wondered what the correct bolt size is. I have to say this is a heck of a site, you guys know your s@*t and im glad you're here. Thanks again..

Thanks for the advice so far guys!!! i started off going to mount my starter and found why there wasnt one on it. Looks like previous owner was alil on the dingy side, both starter bolts are broken off i managed to get the inside bolt out. But the other is in VERY BAD SHAPE, looks like he has...

Hi Guys, im new here so please be gentle. lol. I have searched this site for a while and found lots of helpful info. But i need some advice on where to start on this project, i just bought a 1984 M1008 with 42k showing on dash. The truck has been sitting awhile and the previous owner is not...