Search results

Thank you. I'll start reading.

It's a 2008 FJ cruiser. Some Google and more educated searches should help now that I know what the problem is, but personal experience/knowledge you may want to share would be great.

That's good to hear. Are you familiar with what goes where before the 4 wires(I'm assuming) leave the box?

I had a Ford 250 for 16 years. I saw the 4 plug on the Toyota and thought it was stock like on my Ford. Previous owners father says it's not stock and thinks there's a converter that wasn't used. Everything is easily accessible so I just have to learn about the 5 to 4 pin adapter and where to...

I think the answer lies somewhere in that Toyota runs a 5 pin plug and to go to 4 pin, you need some sort of an adapter. I think the previous owner of my vehicle may not have done this.

I "think" I did everything by the numbers in wiring a 4 pin connector to the 12 pin male trailer end. I switched the 24 volt incandescent lights in the tail lights for their 12 volt counterparts. The LED and incandescent running lights and blinkers work. The brake lights don't. Is there a...

This is what I followed(I think) Civilian trailer wiring Green wire = Right turn/stop light Yellow wire = Left turn/stop light Brown wire = Tail/marker/running lights White wire = Ground Military harness circut # and Pin 22-460 Pin J = Right turn/stop light 22-461 Pin B = Left turn/stop...

I toughened(not shown) up the female housing. I switched out the incandescent tail lights from 24 volt to 12 volt(1 small 1 large in each tail light.small on top large on bottom same as the 24 volt lights were.). The rest were LEDs Long story short. Running/marker lights work when vehicle...

It's like new. Pulls like a dream. My wiring solution and pics with trouble shooting request to follow.

Ahhhhh. I saw the protrusions and assumed the part above was male, but that must be where I would wire my civie plug to. And the 12 pin receptical above mates with the plug in the photo attached?

That item plugs into a seven blade RV receptacle. I was hoping to create the same thing but with a flat connector to mate with my vehicle.

Hello gentlemen-and any ladies here, I'm thinking I can wire a civilian connecter that fits my vehicle to this and have an interface system that will work connecting to my M1101 trailer(not picked up yet) leaving all original trailer wiring intact...

Would a 2012 trailer like this be rigged with all LED lights? I'm kind of confused igrom my searches if that will be the case or the tail lights may be 24 volt non LEDs.

This is it. $900 on the road. Please tell me I did ok.

It must be because I'm not sure what mv is....military vehicle?

Hello steelsoldier members. I found this sight researching an m1101 purchase. Great reading and thanks for all the information. I'll be pulling one home from Ft. Leonard wood via central Missouri to NW Missouri. I traded an old pickup for a Toyota FJ Cruiser and needed something to replace my...