Search results

Yea sorry I was thinking of suspension bushings. Ill check out the suggestions, thank you.

Ive done a search and dont see anything on bushing kits. I was wondering if anyone knows of a company that sells a full bushing kit for a stock m1009.

Well Im not as dumb or old as I thought. It appears the alt is bad. I noticed when it was running with the new belt the lights went off, but as soon as I turned off the truck the lights came on again. I unplugged the red wire from the back of the driver side alt and the lights went off. I...

Well Im feel pretty stupid or at least old. I got some time this weekend to look at the truck, and to my surprise and delight its missing a belt. I didnt even notice it when I checked it before. I am so used to it being something more complicated like fusible link or rebuilding the alt. I...

Yea I think its the alt as well but I wanted others to chime in 2 brains are better than 1 and hundreds is great. The reason I think its the alt is that my volt meter is no longer reading in the green. Just on the line between green and yellow as if one alt is working and the other is not. Ive...

Got in the truck today and my wife said something was burning. I could smell it as well. I checked under the hood and could not see any wires melted or smoke when we got to the store. I turn off the truck and the gen1 light is glowing. We go straight home and no more smell but when I turn the...

I checked the starter plunger and it does move freely. So I rotated the flywheel while pushing the plunger in. It eventually seated into the flywheel and didnt come out. So I cranked it and it fired right up and the plunged then pulled back on the starter. So what is the causes of this? Do I...

When I removed the starter I left it wired up. If I start it it seems to work fine. The gear moves out on the bendix and spins very fast. Its one of the reasons im so confused. I thought it might not be getting enough juice so I cleaned all the ground terminals and even added the slave port and...

I just put in two new batteries. They are reading about 12.4v each. When I crank the gen. The starter tries to engage but it wont catch the fly wheel. It clicks like a low battery but every now and then it seems to catch and it spins the fly wheels just a small bit and make a loud clank noise. I...

Yes I get 12v on one pin and 24v on another pin but neither of those pins are #2 or #11. So I was not sure that its supposed to get power. I cant see how it would work without getting power to one of those pin locations. Im digging through the schematic trying to follow the lines and see if...

Yes I did and it works fine for the light under the dash. It turns it on and dims it as well.

So the drive lights on the dash are not working. Everything else works fine in the dash cluster. All turn signals work, gen1 gen 2, high beam, 4x4 all lights turn on as they should except the drive lights that light up the speedometer and the fuel gauge and the voltmeter light. If I pull the...

I have not had a chance to look at it. But from what I read it sounds like it’s either the fan motor the resistor on the back of the fan housing or the switch that turns it on. I’ve looked online and all together it appears to be less than 75 bucks. I’ll probably replace them all.

Ok Ive read a few things now and I see what I need to look at. Thanks for the advice. Ill check resistor and switches and pigtail.

Heater worked fine this morning. After work you can turn on the heater fan switch but the fan does not come on, but the GEN1 light comes on. Any ideas? Im looking through the TM34 at the schematics just wondering if someone has seen this before. I feel like its a short somewhere.

Yes I did find the injector that is leaking. Anyone want to share a link to where they get their injectors that are known to work well? I got these from pensicola diesel and the first set had a couple that leaked, now after a year of using them we have a couple more leaking, So I need a...

Yea these questions are why I am asking. I have replaced everything from the tank to the IP. We put in a new tank new sending unit all rubber hoses replaced, new IP new air filter new spin on fuel filter all in the last 2.5 years. Nothing made it run like this until we did the injectors. But I...

IP is about 1.5 years old with maybe 5k miles on it.

Will bad injectors make the 6.2 sound like its idling to low? It feels like its idling to low and actually makes the truck shake a little. Ive turned the screw up a little to make it idle smoother and after a few months it seems to idle the same. I am not sure if I have some bad injectors or...

IN