Search results

Is there a way to remove the flywheel cover without removing anything else like the drive shaft or the crossover exhaust? It's a 6.5 na that has I believe the two piece cover. It has the separate part that removes to expose the starter bendix gear. I have a ticking that seems to be coming...

Grounds and batteries clean, good, and tight. Batteries at 25.5volts. 1987 6.5 na that went to Maine in 2006 for rebuild. I replaced the 60 amp with a 200 about 2 months ago and everything's fine. Today I went to start and the light blinked once and then no power. None at all when I turn the...

So I had a knock that went away when I cracked the fuel line to one of my injectors (2nd from the front on the passenger side). I ordered a new injector from Kascar and installed it today. The knock is still there but goes away when I crack the fuel to it. I am a novice but I thought a sign of a...

Can someone please tell me the size and hardness of the bolts that connect to the rotor? I replaced my left front halfshaft today and I want to replace them. Do I also need to replace the bolt that attaches it to the hub? Last one, I promise. The bolts on the rotor only had the split lock...

Good Morning. I need to replace the shift seal on the transfer case. Can someone tell me if this is what I need for the job? Also, will I need to drop the transfer case to do it? Sorry for the link. I know they usually expire...

I am going to make my own grounding harness like the one sold online and all I could find at the two hardware stores and tractor supply is 12 gauge. Is this big enough for the ground or should I continue my search for 10g? Thanks.

I looked for Dexron III in the auto store today and couldn't find it. The sales guy told me the Castrol Transmax Dex/Merc was the same as Dexron III and was safe to use. Has anyone used this or know if this is safe to use? I'm changing fluids tomorrow while waiting for my starter to be rebuilt...

Hello everyone. As the title states, the engine cranks but right as it seems to kick over it stops cranking and makes a whirring sound and won't start. It is an 87 with a 6.5 that seems to have been rebuilt at limestone, Maine in '06. I've checked fuel filter, replaced glow plugs, cleaned all...