Search results

A 96' F-350 so that would probably be a early 7.3 powerstroke, guess ill have to look into that.

Thermals are nice but they are digital and have a refresh rate you have to think about, I can keep my deuce going pretty good at 40 with my PVS-14s Any faster and I'd out range my IR illuminators. Having tried driving with the RH25 and Yoter-C the minor lag takes some getting used to. But that...

I've thought of this many times as having a 6bt and nv4500 in the back of my shop. There are a few older model eaton fullers that 'might' fit Like some of the TO-905 series. Or a 5 or 6 speed with a 1:1 final and a brownie box aux transmission after the transfer case like a 3A65 just down shift...

Looking at my rear pack and the front pack I know I need the bottom plates since both the fronts are cracked. Which other spring do you think I could steal? Also if your wondering a rear rockwell with brakes, oil and two 9.00-20s weighs 1037lbs

I came to the same conclusion. After way to much searching and only find 2 topics on it by accident, it seems for some reason using 5 ton springs in a m35 is not a popular topic. While it would work I would have to take a few leaf from the 5 ton pack, or add a few leaf to the 2.5ton pack. So I'm...

Well I'm bobbing my deuce and I still need to carry a quick question. Would front springs from 5 ton (m818 ) work for a bobbed m35a2? I was going to use front deuce springs and right before I started drilling the holes(well I drilled on hole) I started thinking about how I was going to add a...

I've already removed all the stock military filters, and have a dual filter system with CAT 1R0750 2 microns and a CAT primary/water separator filter that I'm forgetting

I still have a 24v system/alternator but its only for the starter, my big 24v power inverter and the 24v hydraulic pump for my crane. Since I replaced all the gauges with autometer z series and converted all the lights to LED there no need to keep small stuff at 24v. Plus the fire department...

I decided to use the line from a international 4700, alot longer than the B700 lines and much cheaper. 7/16 inverted flare at the top mount, banjo at the bottom. part number is H77858 https://www.dormanproducts.com/p-13119-h77858.aspx Was about $20

Well as a part of my build I'm converting everything on my truck to 12v except the starter, 120v inverter and hydraulic pump. But still have a intank 24v fuel pump. So anybody know of a good 12v pump that I could put on the frame rail? That and a 12v fuel tank switch, planning on dual fuel...

Rusty, what computer are you using to control the allison 1000? I know this is going to need a Throttle position sensor to get tied into the linkage for the multifuel throttle.

I'm thinking the same about the brakes lines, I'm putting in all 1/4 of the new nickel/copper lines for the hard lines, for the hose, I'm going to see if front lines from a 1994 B700 will work. If I have custom lines I have to a few extra laying around, and the b700 lines are an autozone away.

Had some fun camping memorial day with the guys, Shot a M1919 shouldering this big was fun One of the guys made some awesome kabobs Then yesterday fought my fender off so I can start getting the power steering in. Then installed my new peterbilt turn signal switch, no more floor switch for...

And a few days later... Worked on a jeep for 4 days in the rain, These spark plugs only are 2 years old I changed them Feb 2020 I love the jeep 3.8L.... Got a new crane controller, I'll be wiring that up this week to control more function on the crane, (lights, momentary or continuous 24v...

Not much done the last few days, to much rain and too much work. But I did get the old battery box out and the new tool box mounts installed, I think I'm going to move both boxes down 3/4 to 1" to let the cab shift right now there almost touching. I did get another of the new tool boxes having...

Yep its only mounted to the bed, but I build a over build sub frame under the bed, that is part of the dump hinge assembly. I cut 20" off the rear frame and replaced with with box tube and tubed out the rear frame section. Now the crane over hangs the hinge by about 16" and the out rigger...

The hydro max booster is from a C6500 or ford 700 It was very hot that day for being spring I got lost in the junk yard (remember hydration! ) Took out the old air box I have a smaller/better Cummins filter I'll be using with a new compact aluminum airbox I'm welding up. Started tearing out the...

Started working on a vertical tool box for behind the cab in the 20" gap I left, it will hold the hydraulic pump, reservoir, valve block to direct hydraulic pressure to the, crane, dump hoist, front and rear work ports, and the hurst spool/tool and hydraulic pole saw. Got a set of new tanks for...

Found mice had got to my top while it was in the shed :( Got the stock tool box off and the then used my crane as a dump hoist to get the real dump hoist in. Went shooting with the guys again, did some cooking and found a baby snake.

The months continue.... Got a PVS-14 to get my night vision game on. Then bought a new to me skid steer, so much better than my old new holland L425 The ATF took $200 from me and only gave me a stamp. The dog got a tactical vest. Had to fix a steering wheel And got a new to me cnc mill. Then...