Search results

I have a harborfreight gun which I love but it can't handle some of the light primers and clear coat I find I need to use on different projects.

RE: Paint Gun Question none of the above I mean this http://www.autorefinishdevilbiss.com/products.php?pg=7 the one I want (FLG-647-WB) says it's a Waterborne version I dont know what that means.

Is there any reason I cant use a Waterborne paint gun with standard solvent type paint?

my knuckle was a mess so much oil got in the grease it turned to soup. Been working Gary need to get all my mv stuff ready for storage when I leave for the army.

I just replaced my front drivers side axle seal and want to thank Banshee365 for his excellent post on the subject and to add a tip if you cant get the tie rod off the knuckle use a two jaw puller put the center post on the top of the flex joints stud the arms on the knuckles arm and crank away.

I have one too if kenny cant find one.

MUDLORD I got the oil pan off my truck with everything in place truck just setting on the ground it takes a lot of wiggling and just the right angles but it does work.

ditto got my clutch disc and plate from him

Throttle goes though the floor right by the Throttle pedal.

RE: Re: RE: Re: RE: N/A LD465 exhaust bits search - again I have one of those pipes in ok shape if you get desperate.

Re: RE: Engine removal/ repalcement DITTO I used a folk lift made it a piece of cake.

RE: Re: Good undercoat I use a PPG epx-900 primer it's a two part product that very easy to work with. p.s I'm useing CARC as a top coat.

RE: Hydro-Max Brake Assist (long read) whats funny with this is we have a ford F750 potato truck with that system and we hate it I spend hours every year making it work for the potato season and the deuces other farms have never seem to lose brakes.

M105 brakes are air over hydraulic

RE: m125 I saw this post and want to add that a farm near me (3 miles) has one of these trucks sorry no data plates it looks like a 10 ton gasser with 3 rear drive axles, it was kind of dark when I looked at it so I couldn't see the suspension but I'll go back ASAP and take a bunch of pics.

1 yes size's are 11.00R20, 12.00R20 these size's are for stock wheels 2 no but look for a 66-67 or later so you can get the air shift T-case there more trouble free then a spring T-case 3 YES very easily 4 depends on how and who you buy it from.

you could go to a Hercules dealer http://www.herculesengine.com/ or try wite owl they have the engine parts much cheaper then memphis.

it's very hard to pull the crank with the engine in the truck!!

I got 12 1/4" on "A" as well.

15 is the same but 23 is not, B the length of hole center to center 15 is 14 1/2"