Search results

I would think so.

Try this gal for PN's Gail Cutler <Cutler_Gail@perkins.com> You must very but I think you have a 400 Series 403D-07 Industrial Engine. If you get a parts book please share.

Hey guys I am away from home w/ limited resources. I have a need to move my Schutt WITHOUT it connected to the truck. In a nutshell I left it parked on a dirt road over the winter and crazy rains caused the trailer to sink. I got the M916 out by airing down and laying out some plywood. The...

Should sell very fast at that.

What are you a$king for it?

There is an oil pressure safety switch. The oil pressure HAS to come up before the engine will start. Read this whole thread about injector pumps needing to be massaged as well. The first batch were flooded at one time were found out. If yours was in that batch you will have many of the same...

I have never measured the angle but it really gets up there. In post #2 in this thread you can see an almost fully extended hoist. I bet ya it is more like 40* These trailers are AWSOME, the potential is huge on all fronts.

Paul, The mission I bought the trailer for is now complete. It will have other missions in the future. It performed well. I did have a radiator failure as I believe I penned about herein, and I suffered a broken weld on one of the triangular shaped chain to container attachment device. The...

The radiator issue that ALL OF YOU WILL EXPERIENCE is a real challenge. As I see it, Perkins sells motors and it is up to the builder to supply the radiator, thus it is not available / obsure. There are some numbers on the radiator but I have exhausted all resources trying to replace it, and...

Paul you must post up some pictures of what I see in your avatar!

Looks like I have a radiator leak. My intel says these motors are sold by Perkins and others add the radiator of there choice to the APU. There is only ONE support/bracket at the top from the block, to he radiator. Mine was broken, it definitely is too small and MUST be addressed gentlemen. If...

Gents my trailer is parked afar from me currently, can someone tell me the OD dimensions of the main A-Frame please? I know it is taller than it is wide, if someone could measure real quick I will be much appreciative.

One is tacked in, a work in progress

Yes, I have considered it, but the weight kills it for me. You could weld in more cross members for support and you could deck it w/ up to 7/16" thickness of whatnot I do believe. If you want to just drive on and off you can do this just where the tires hit the floor and not deck the whole...

Right back at you and all! Merry Christmas!

I don't think I would take less than $25K for mine. It is AWSOME!

The spare tire cover off of Toyota FJ Cruisers just barely fits over the spare tire....FWIW

I think I did a write up about the brakes, the chrome plated caliper sliding mounting pins are all rusted, they need to be replaced so the calipers slide correctly. After what I have seen each corner needs to be torn down to the shaft and many parts replaced and bearings serviced. These...

I do believe the Lodar remote control poop is HERE

I used my trailer for the first time. it was not exactly fun because this container I believe was not built to ISO specs. the corners look ISO but the metal is only about .125" thick so the black guides were sloppy. I have a resolve for this, I am going to get a piece of 2.5" Sch 40 steel pipe...