Search results

I took the spare down yesterday, so I will look at it so I know what you guys are talking about. I will most likely change the tire out and fix the one that is leaking, it seems like the simplest way to deal with the situation. Has anyone customize the CTIS so that it can be used manually...

On the front tires, it doesn't look like you can reach the inside valve stem without removing the tire. The tire is holding at 40 PSI, I will check it every couple of days, it took a long time to get down to where it was too low to yard drive. I may try changing the schrader valve core and see...

I am going to have to investigate this further, I figure if it stopped leaking, it must be some o-ring or rubber seal, if the steel was corroded it would not have stopped until the tire was empty.

I may try that after swapping the tires. I got really lucky, it is holding at 45 PSI. I am only using it in the yard, so I am back to GTG from FUBAR. I will say that the spare tire is a lot easier to get down when you just don't care. I dropped it, then caught it after a couple of bounces...

Well my GTG just turned into fubar. I talked with Andy and it seemed like things were working, but the tire was not coming up. I took the CTIS hose off as he suggested and there was a schrader valve core all ready installed. So I started adding air into that one, everything was great until...

The steel protector is in the way and I can't exactly tell where it is leaking from. It seems like it is bypassing the tire all together, is there another location to manually inflate or am I at the right spot?

What is the procedure to manually inflate a front tire? I am trying to use the schrader valve on the outside of the tire, is there another way? The tire is holding air, but it is so low, I do not want to drive it around before adding air. The air seems like it is hissing out right behind...

I did, and I tightened it down with pliers after just using my fingers and getting the leak.

The CTIS is disconnected at the control box inside the cab, it was that way when I got the truck. I am trying to inflate the tire through the valve stem on the rim, all it does is hiss air out like I am using a blow gun. The schrader valve is working, the tire has been slowly loosing air and I...