• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Search results

  1. S

    Winch help

    OK I wish I could post the page 18-24 from the tm that I have on my one post. The lock does not come out as one piece on this old of winch, the pin comes out the drum side. So I will weld this one back up or try and find an older style lock, I don't think the new style will work. Thanks for...
  2. S

    Winch help

    I didn't get a chance to work on it tonight. I will try again tomorrow and see what happens.
  3. S

    Winch help

    I will give that a try.
  4. S

    Winch help

    OK I can't get the TM to up load that you gave, but if you go to page 18-24, mine didn't have nut #5 only knob 4 and nut 3. But from that picture it looks like the pin is removed from the drum side. I have been soaking it with pb. Oops it did upload.
  5. S

    Winch help

    I tried it but it doesn't move free enough,its stripping the shaft. I guess I will learn how to take a winch apart.
  6. S

    Winch help

    I don't see any other nut. The only one I see is the one I used a 3/4 wrench.
  7. S

    Winch help

    Thank you for taking the time to help.
  8. S

    Winch help

    OK here are some pictures of what came off. I tried to get it out again it will not come out, it moves in and rotates 360, but only moves out enough to disengage the drum. I'm at a loss.
  9. S

    Winch help

    I will post a Picture of what I have off when I get home.
  10. S

    Winch help

    Wow that is great, thanks for finding that. Now I wounder if I can use the new style lock, or weld mine up and look for an old style spare. Thanks again.
  11. S

    Winch help

    Thanks guys I'll check it out tomorrow.
  12. S

    Winch help

    That helps, since the spring wasn't in there maybe it set back on the shoulder in the hole. Thanks again now I know where to get a pin and maybe a spring.
  13. S

    Winch help

    Thank you now that I know nothing else is holding it in there I will work on it more, or like you said pull the side off. Thank you again.
  14. S

    Winch help

    With out sounding stupid what is holding the shaft in? I would assume it was #3 in picture.
  15. S

    Winch help

    I do have that picture but mine didn't have the spring and I can't tell by the picture but it looks like the stud should come out with out taking anything else apart? Am I correct so I don't break anything else. Thanks Scott
  16. S

    Winch help

    OK while I was taking the nut off the threaded rod snapped, never found a spring behind the nut. Is the stud suppose to come out now, it moves 360 with vice grips on it but not in and out very well.
  17. S

    Winch help

    Hello all, I just bought a winch off a truck that has been sitting to quite awhile and doesn't run, I didn't get a chance to look at it real good. My problem is tonight I got a chance to check it out and I can't get the drum lock latch to pull out, so I'm wondering if it is just seized in place...
Top