Search results

So, thanks to Ray I got the IP back and installed. Fired up the unit and it was hard to start, blew blue smoke and just ran poorly...so after conversation with Ray it was determined I set the timing 180* off. Even though I had the pointer directly on the PC mark and the 1/8" drill bit in the IP...

So I have added ATF to all my diesel, both in the machines and storage. Will it be ok to add the Optilub I just bought along with the ATF? Don't suppose it will hurt a thing but just have to ask.

So run your unit once per month for how long and do they need to be under load.

Cetain is what some old Cummins mechanics recommend. Jet-A has less of a lubricating quality. I can buy off road diesel here, it has a red color added to it but is probably no different than taxed diesel. I have a diesel pickup with a 40 gal. tank. Will probably start rotating stored fuel into...

Perhaps I should go to 2 oz/gal of ATF in the fuel instead of just 1. IP on it’s way to you.

I would really like to learn how to rebuild this IP but don't think I have the right tools and certainly not a good room to work. Yes Sir, if you would please order the parts, I'll get it off, drain it and clean it up before sending to you. Thanks for all your help.

No Sir, plunger not moving in & out and not rotating.

So we have fuel (1 oz ATF per gal diesel) going to IP but no fuel to injectors.

When I first got it, it was in pretty bad shape. 1977 model with 1527 hrs on it. Got it running and itran pretty good and then started going down hill. All seemed to trace back to IP& injectors so sent them off to Ray for rebuild. After they the unit ran great with no issues. Last ran about 6...

Well the gov. Solenoid is finally picking up but not getting fuel to engine. Fuel is coming out of fuel tank return line so going to have to pull injector lines I guess.

My bad, that should have read K3 relay

I just tested K2 relay and with CB2 pushed in, I get 25.3V incoming and 18.2V outgoing. Haven't looked at wire numbers yet. could this be an issue?

Voltage at batteries also reads 25.3V

25.3V at both S1-11&15

Go relax and I’ll get back to you tomorrow. Forgot you’re in Germany.

solenoid moves up and started motor kicks in

yes Sir and they are new and freshly charged.

Yes Sir, 19v

Yes Sir, have continuity

There is continunity yes.