wkbrdngsnw
New member
- 92
- 1
- 0
- Location
- Aurora,Co
I have been having problems with u-joint wear in the front location of the rear shaft and with the best joints they sell at the local parts store I can get maybe 2500 miles out of it. The rollers show almost no wear but the end of the cap is worn to the point that it has about a 1/16" of play on the transfer case yoke only. The part number is a 534g and is the one that the computer says for a civ blazer so I assume its the right one. There also is a growling noise from that area when turning that might be related.