• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

16 Exhaust Pipes Group buy?

Status
Not open for further replies.

tgejesse

Well-known member
276
288
63
Location
Maryland
I'm still relatively new here, but I'd love to get my hands on one of these. Is there any way we can coordinate a group buy for these?

 

M1165A1

Well-known member
410
857
93
Location
The High Country, CO
Don't know what the forum rules are on that but I would be in. The real issue is how do you get them to the buyers. Shipping price is killer on these.
 

tgejesse

Well-known member
276
288
63
Location
Maryland
Don't know what the forum rules are on that but I would be in. The real issue is how do you get them to the buyers. Shipping price is killer on these.
I live about 1.5 hours from where these are so I would be able to pick them up, but like you said shipping to the buyers is going to be expensive.
 

Action

Well-known member
3,576
1,557
113
Location
East Tennessee
And, you should check to make sure those are not for the armored trucks. If so, you will either need spacers for the fender bolts, or remove some of the lower section and reweld the flange back on.

like this one.....
1623347481191.png
 
Last edited:

Milcommoguy

Well-known member
Supporting Vendor
1,706
2,255
113
Location
Rosamond, CA
I'm still relatively new here, but I'd love to get my hands on one of these. Is there any way we can coordinate a group buy for these?


At the listed price of $375.... And I don't know if that's a deal or not ??? But 16 of them works out to $6000. Thinking out loud here... seem like a simple hobby home build with the help of a good muffler shop and some expanded wire screen. One could only wish to get them on the cheap. Those auction can go crazy money.

Don't need one. Good luck. Watching from the sidelines, CAMO
 

Coug

Well-known member
Steel Soldiers Supporter
2,953
4,298
113
Location
Olympia/WA
I had one on my truck, ended up being more hassle than it was worth to me.

made the truck wider so it couldn't fit through the 4x4 trails as well.
Made the BEOD I had on the back of the truck harder to access.
left trails of black soot down the side of my truck whenever it rained and water got in the exhaust.

Unless you're really planning on going through more than 2.5' of water, and want the ability to turn off the truck while doing so without water flooding back into the engine, then the only reason to have it is cosmetics, which to me just isn't enough to outweigh the negatives. I removed mine and left it off.
 
Status
Not open for further replies.
Top