Phoenix77
Well-known member
- 240
- 543
- 93
- Location
- Greenville, NC
Recently my 1986 M998 converted itself to front wheel drive only. Even in "HL", which is supposed to lock the rear diff (right?).
I have recently replaced 3 of 4 half shafts and none of them were broken (hindsight).
I jacked the rear end up, chocked the front, put it in gear, and gave a little throttle to see if the rear wheels would turn.
Nothing.
I can turn the rear drive shaft with my hand about 1/2 turn, and the front shaft moves too, so I don't think it is the T case.
Thoughts?
Thanks
I have recently replaced 3 of 4 half shafts and none of them were broken (hindsight).
I jacked the rear end up, chocked the front, put it in gear, and gave a little throttle to see if the rear wheels would turn.
Nothing.
I can turn the rear drive shaft with my hand about 1/2 turn, and the front shaft moves too, so I don't think it is the T case.
Thoughts?
Thanks