1991 936a2

[Gamagoat1]

On a 1991 M936A2 there is a sensor or something screwed into the outlet of the fuel transfer pump on the driver's side of the block. It has 4 wires coming out of it. And, I do not have a picture.
It is not shown or mentioned in the 2012 parts manuals.....

What is it and what is its function??

 

[CBR Metalworks]

http://www.steelsoldiers.com/showthread.php?120271-Fuel-switch-above-primer

There's your answer. I won't fuss at you for not searching, as I can't ever find anything useful when I search! haha

 

[doghead]

I think what you are referring to is shown in the -24-1P TM. Figure 145.

Can you or someone else take a picture of the item?

 

[Jeepsinker]

Didn't we just finish a thread on this? Or is this a do-over because that one got ummm... nasty?

 

[Jeepsinker]

Anyway, to the O.P, it is a fuel pressure sensor for diagnostic equipment. That's what we came up with collectively in the other thread.

 

[KsM715]

Didn't we just finish a thread on this? Or is this a do-over because that one got ummm... nasty?

Your time line is off. The OP went to that other thread and started bitching over there about being asked to post a picture rather than just posting a picture in this thread. As they say, a picture is worth a thousand words.

Notice the OP is banned. (Temporarily I believe) hopefully he will return with a little better understanding of how we operate around here.

 

[Jeepsinker]

Oh roger that. I sometimes fail to look at times posted and such.