grantmhawkins
New member
- 13
- 0
- 0
- Location
- Atlanta, GA
Hey! I have a M1081 - has anyone had any luck finding a weather stripping kit for the doors and/or seat covers (bottoms and tops) for all three seats?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
1995 M1081 Parts needed
- Thread starter grantmhawkins
- Start date
Rene M
New member
- 201
- 2
- 0
- Location
- Houston, Texas
All on ebay... not joking.
grantmhawkins
New member
- 13
- 0
- 0
- Location
- Atlanta, GA
Rene M
New member
- 201
- 2
- 0
- Location
- Houston, Texas
Rene M
New member
- 201
- 2
- 0
- Location
- Houston, Texas
grantmhawkins
New member
- 13
- 0
- 0
- Location
- Atlanta, GA
Rene M
New member
- 201
- 2
- 0
- Location
- Houston, Texas
Ive been looking too... =)
recksmilparts
Member
- 70
- -1
- 8
- Location
- Texas
Think I have the parts you need. Seat backs and bottoms, also door weather stripping. Just not sure of how many.
grantmhawkins
New member
- 13
- 0
- 0
- Location
- Atlanta, GA
Awesome - let me know about the seats. need the driver, passenger and third seat. Backs and bottoms.
Sent from my iPhone using Tapatalk
- 5,637
- 381
- 83
- Location
- Spring Branch, TX
Rene you need to review the site rules. Big no-no to post links to auctions on eBay, GovPlanet, GovLiquidation, or ads on Craigslist unless they're for items you own and are selling.
- 6,861
- 697
- 113
- Location
- Stratford/Connecticut
You can use generic automotive weather stripping.
- 518
- 179
- 43
- Location
- Stoneville, NC
That's what I did. Local auto parts store had some that was a 14ft long strip and it almost did the whole door and cost under $30. It leaves a small gap, but is still better than nothing! After I put that on my doors I had to readjust the doors to close properly. No more drafts coming in through the bottoms of the doors.
- 6,861
- 697
- 113
- Location
- Stratford/Connecticut
You can order rolls of slightly thicker stripping online. I have seen people trying to get hundreds of dollars for weatherstrip that costs 25c a foot.
- 518
- 179
- 43
- Location
- Stoneville, NC
The stuff I used was plenty thick. The factory stuff was mostly gone, so after replacing it with the auto parts weather stripping, I had to adjust the doors OUT just a little and the latch pieces so the doors would sit flush against the weather stripping and still close properly. If I redo mine again I'll look for a longer roll that I can order to get it completely around the door. I left the small gap at the front edge of the door near the grab handle and so far no issues.
Rene M
New member
- 201
- 2
- 0
- Location
- Houston, Texas
Sorry, and i did know that.. i was just trying to help.. Just to clear the air i have nothing to do with any of these sellers and nothing to gain from the sale.
that said.... who has those door seals? i would like both sides.
- 9,604
- 1,494
- 113
- Location
- mid- michigan
Auction Postings:
Please abide by the following rules concerning the posting of auction information in the forums:
• Do NOT post about future or current GL/GP(GovPlanet)/GSA/eBay (including items for sale in buy-it-now formats)/local/city/state/Federal/estate auctions. You may post about any auction after the auction is closed.
• Do not post links to auction photos.
• Do not post links to GL/GP(GovPlanet)/GSA(or other sites)that have links that quit working after a short period of time. Save the image to your PC and then attach it to your post.
• Do NOT post links to current eBay auctions or Craig's List ads that are not your own. You may post a link to your own auction/ad only if it is in an information/discussion thread about your vehicle/item. Do not start a post in the Conversations forum or your vehicle specific forum just to announce your auction/ad.
• No collusion as specified above.
Rene M
New member
- 201
- 2
- 0
- Location
- Houston, Texas
Sorry guys, that rolled up news paper was for my nose not yours.
grantmhawkins
New member
- 13
- 0
- 0
- Location
- Atlanta, GA
Thanks for all the help guys! Also does anyone have a Stewart and Stephenson body emblem (the logo)? Mine is missing and I'd like to replace it.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
grantmhawkins
New member
- 13
- 0
- 0
- Location
- Atlanta, GA
Does anyone have any interior door handles for a m1078/m1081? I am looking for 2.
Also - has anyone found a decal kit for the m1081/m1978? Would like to add the labeling (i.e. Dip stick, no step, panel storage etc) back to mine when I restore it. Or if you have a map of what and where the labels should be that would be great too.
Sent from my iPhone using Tapatalk
Also - has anyone found a decal kit for the m1081/m1978? Would like to add the labeling (i.e. Dip stick, no step, panel storage etc) back to mine when I restore it. Or if you have a map of what and where the labels should be that would be great too.
Sent from my iPhone using Tapatalk
- 1,172
- 24
- 38
- Location
- Clifton, TN
I believe the labeling is all done with stencils and contrasting paint. There is a vendor here in classifieds that has some oil board stencil sets for sale. If your vehicle isn't listed I believe he will cut you a custom set.