• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

2 1/2 ton windshield frame to m37

BKubu

Well-known member
Steel Soldiers Supporter
4,720
1,081
113
Location
Gaithersburg, MD
The windshield glass/framework is the same. I am unsure if the A pillar is identical. I've never owned an M37. I do know that I purchased replacement windshields previously from a company that sold M37 parts exclusively. That's how I know the windshield glass/framework is the same.
 

G744

Well-known member
Steel Soldiers Supporter
1,544
3,355
113
Location
Hidden Valley, Az
M35-type glass frames will fit the M37 no problem. I have seen some from M35's that had the wiper holes offset to the side a bit, but that is no biggie.

DG
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,806
723
113
Location
Liberty Hill, SC
I put new m35 inner windshields in my m37. They won't close all the way and the latch at the bottome won't catch. I measured the top of the frame and there is almost a 1/8in difference in the height above the glass on the m35 frames I got, and the m37 frames I took off. I am going to probably switch the upper parts from the old windows to the new ones. It might just be a brand thing too, the ones I have are Korean replacements
 

Black Ops

Active member
Steel Soldiers Supporter
156
81
28
Location
Colchester, VT
I’ve installed a couple sets of Korean windshields in m37s with no issues. As mentioned above some 2.5 tons had wipers offset to the center of the truck and are not as good a fit when it comes to the vacuum line location in a Dodge. The windshields with offset wipers were on earlier deuces.
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,251
18,795
113
Location
Charlotte NC
I’ve installed a couple sets of Korean windshields in m37s with no issues. As mentioned above some 2.5 tons had wipers offset to the center of the truck and are not as good a fit when it comes to the vacuum line location in a Dodge. The windshields with offset wipers were on earlier deuces.
.
Different Koreans maybe?
.
 

Ferroequinologist

Resident railroad expert
Steel Soldiers Supporter
4,806
723
113
Location
Liberty Hill, SC
I have also seen other Korean windshields in m37s, mine just doesn't seen to fit the same for some reason. The difference in hinge measurement is the only thing I have found to explain it.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks