2012 Ga Rally parts wanted/for sale/swap thread

[3dAngus]

Dangit!

I can't find my M35A2 filter set. I put it around here somewhere. Found my M35A3 filter set, complete. If anyone wants to trade their new M35A2 filter set for a M35A3 filter set, please let me know. It includes the air filter too.

Otherwise, I will bring and sell my M35A3 filter set with all the fuel and oil and air filters, for what I have in it. $100
Then, I'll just buy the M35A2 set. Thanks.

Trailers:
I'll also be bringing my M105A2 with sides, bows, and cover (fair) and M1101 with the same. Only one can go back with me, so make an offer.
I bought several trailers to make these the best structually, but they need fresh paint to be perfect. Very clean as it is.

 

[poppop]

Gerhart, The JD part number on those pumps is AT 103945. They were made by Parker. There is another number on them that could be a Parker number which is 322 9110 049 or maybe an NSN. I called my Deere dealer and they fit the following loaders, 544 E, 644 E, 624 E and 644 EZ. Their list price today is $1828.00 each. I am asking $500.00 each and I have several.

 

[timntrucks]

anyone need any 105 parts. springs and rear landing leg also bringing a camo duece cargo cover and a green 105 cover and if anyone wants some 3/4 chain i have a couple i can part with

 

[MDSA]

I have 2 sets of 101 sides - mostly wood. One green, one tan. 3 of the gates are fiberglass. $100 per set.

Tan 101 cover - minor rip in front and one corner seam rip in rear - $150

 

[doghead]

I just loaded a 20' slave cable. It's the old style 2 pin. In good condition.

Offers or trades welcome(in person).


I'll have 5 ton front winch shear pins with me also.

 

[docfarmall]

Shot pics of the 24 volt warn winch today
also have a bag of 1/2" key stock these are used in transfer,tranny,rear ends to remove plugs insteed of ratchets
ratchet straps too
looking for some of those 4' long tent lights , like Bruce lights

 

[doghead]

Pete, I'd like...

817 toolbox/tire rack - $75

818 rear fenders - $10

800 series fuel tank selector switch - $10

Dual Genset selector switch box - $25

900 series Hydraulic kit (less PTO) - $100

Can I get them gift wrapped? They're a suprise for my wife!

 

[1crook]

Pm sent about the deuce cargo cover and M105 cover Tim.

 

[CARNAC]

need the manual for the army brake bleeding kit, one we used on in 60's and later
thanks
will be on site on Fri morning

That's on the web. I downloaded mine from the web. If you don't find it, I'll see if I can find it once I get home in 2 weeks.

 

[doghead]

I'm still looking for a good take off (complete) passenger side CUCV(M100 door.

 

[JOECOOL48]

I have a new 1 gallon unopened can of OD GCI 595-34086-11lfd from Rapco, I would like to swap for 383 GREEN or 23070 or 24087

Would anyone be in the need of new camo net support systems, If I were to bring any?(got several) I would rather swap them for things I need. I am looking for, cargo top, and any extras for M35 Duce.
Cargo cover, bows and extras for M105A2 Trailer and cargo cover M116A2 power unit trailer.
.Camo support system Includes 12 fiberglass support poles 18 battens, 12 Aluminum stakes and 6 batten -pole adapters and bag. DOES NOT INCLUDE NETS.

 

[CARNAC]

I'm still looking for a good take off (complete) passenger side CUCV(M100 door.

You might want to see if TWRIGHT is coming. He had some last month.

 

[3dAngus]

I have a new 1 gallon unopened can of OD GCI 595-34086-11lfd from Rapco, I would like to swap for 383 GREEN or 23070 or 24087

Would anyone be in the need of new camo net support systems, If I were to bring any?(got several) I would rather swap them for things I need. I am looking for, cargo top, and any extras for M35 Duce.
Cargo cover, bows and extras for M105A2 Trailer and cargo cover M116A2 power unit trailer.
.Camo support system Includes 12 fiberglass support poles 18 battens, 12 Aluminum stakes and 6 batten -pole adapters and bag. DOES NOT INCLUDE NETS.
View attachment 366423

Joecool

Ill trade some. Ill have most stuff for the M105 including 3 different size
tires air tanks, wiring harnesses, lights, legs, sides., bows.l., and canvas.
Come see me with your support system. I bought a 30x30 net from streamline so will need some more stuff.

 

[pgwaldner]

rims

I would like some 12 bolt humvee rims and some run flats.

Due to change 50000, I need ....a ride from the airport!!!!!!!!!!

Partial list of what I have available, and will try to fit into the cargo bed.

Troop Seats:
4 sections 5 ton Longbed, all fiberglas, real nice cond - $150/set
M817 Troop seat set - $150
Deuce Wood/fibreglas set/headboard - $150
2 deuce troop "SEAT" sections only, fiberglas - $50/ea
Deuce steering gearbox - $40
M105 metal bows - $10/ea
Large new air tanks - 9.5" x 37" - $20/ea
Humvee run-flats, 16.5" - $8/ea
5 ton Gasser fenders, 1 left/1 right, - $75/ea
1 RH 800 series fender - $75
Fender support brackets - $10
818 spare tire rack, w/air lines - $50
817 toolbox/tire rack - $75
Snap-On plastic toolbox w/metal drawers - $20
20" beadlocks (metal/rubber) - $15
800 series fuel tanks - $75
800 series steering gearbox - $75
Deuce toolbox/step - $50
8 and 12 bolt Humvee rims, 16.5" - $50
818 rear fenders - $10
M105 side rail set, tan, little bruising - $75
M105 side rail set, tan, Nice - $100
M105 side rail set, green - $100
M105 tan cover, decent - $75
M101 tan cover, decent - $100
M101 Bow set - $50
900 series spare tire davit, NOS - $20
10 - Metal bow corners/uprights - $5/ea
4- New Split rim rings - $5/ea
Deuce heater box with switch - $50
800 series sprague clutch, NOS in box - $200
Deuce artic grill cover - $25
800 series fuel tank selector switch - $10
Cargo cover hdwe kits - $10
NOS Deuce air filter, in box - $20
900 series mirror brackets - $25
Dual Genset selector switch box - $25
900 series Hydraulic kit (less PTO) - $100
48" NOS muffler guards, tan or alum - $10/ea
800 series Cummins air filter housing - $10
New Deuce pressure plates - $60
Red Fire Truck light bar, works fine - $100
5 ton longbed Cargo Cover Kit, Artic White - $450
Deuce Cargo cover, tan, some stainage - $100
Deuce Bumpers, nice and straight - $100
Slave cable outlets (cab mount side) - $20

Let me know if you need additional pics of other items. Larger items I won't bring unless someone commits. Thanx, Pete.
pandctrans@gmail.com

 

[CARNAC]

Got a ride, I'm good now. Thanks.

 

[tigger]

My friend gave me1 water can and one gas can for $15 each and i got 3 semi trl air tanks $20 each 1 air cleaner asembly for i dont know what $15. And i have 1 new 1500wt inverter $120 newe in box.

 

[Makincold]

I still need an M818 behind the cab tool box, (box only not the other stuff)

 

[docfarmall]

I think i have one toolbox PM me or drop me a call headn out to load some more.opcorn:

 

[vinny-socom1]

I have 2 sets of 101 sides - mostly wood. One green, one tan. 3 of the gates are fiberglass. $100 per set.

Tan 101 cover - minor rip in front and one corner seam rip in rear - $150

If money permits I would like to get a set of the fiberglass ends.

Vinny

 

[pctrans]

You should rephrase that to say: If MsVinny says its OK.......