2016 Ga Military Vehicle Rally buy/sell/trade thread

[Chief_919]

I have a spare tire for a bolster trailer. The tire has good tread but is prob dry rotted. It is holding air and I think it will fit other trailers with that same bolt pattern.

20 bucks or swap for something else I don't need. It will be on the truck no matter what so first come first served unless someone claims it.

I will take that. It will make a good extra spare for my M105 I am running those on.

 

[gimpyrobb]

I have a spare tire for a bolster trailer. The tire has good tread but is prob dry rotted. It is holding air and I think it will fit other trailers with that same bolt pattern.

20 bucks or swap for something else I don't need. It will be on the truck no matter what so first come first served unless someone claims it.

Taylor trading probably wants it.

 

[wreckerman893]

I will take that. It will make a good extra spare for my M105 I am running those on.

You got it Chief. We can work out a trade on something in your stash.

 

[goldneagle]

I have a M936 Vise Mounting Plate (used) for $75

Also (5) NOS 12 bolt HMMWV rims some missing o-rings and stems. (will edit when I get a count on the stems and o-rings) Asking $100 each

 

[Al Harvey]

I do have a few things I'm looking for.

DRASH tent poles ( to replace broken ones)

BASE X 305 Liners, End Caps, Floors, Poles, etc.

 

[izzug]

Does anyone have Robotool (Aircraft Dynamics) electric 3/4 impact guns for sale at the rally?

 

[gimpyrobb]

Does anyone have Robotool (Aircraft Dynamics) electric 3/4 impact guns for sale at the rally?

I'll have a 1/2 inch drive, but its got the gear reduction with it.

 

[MWMULES]

I do have a few things I'm looking for.

DRASH tent poles ( to replace broken ones)

BASE X 305 Liners, End Caps, Floors, Poles, etc.

I am pretty sure I have an extra tan 305 end wall $30, just have to get it loaded.

Also have a couple extra tan walls for the 11X11 command post tents

 

[izzug]

I'll have a 1/2 inch drive, but its got the gear reduction with it.View attachment 648393

I'm trying to find a 3/4....thanks. How much do you want for the 1/2 kit?

 

[goldneagle]

I'll have a 1/2 inch drive, but its got the gear reduction with it.View attachment 648393

According to the manufacturer the gear reduction adapter is not supposed to be used with the impact gun. It is to be used manually.

 

[Sapphire]

If you encounter Southeast Military Tires as a vendor, please beware! They are located in Georgia and are likely to be at this show.

These guys ripped me off for a 85%+ Michelin XML, which arrived with a 1/2" chunk of steel penetrating the tread all the way through. They refused to replace it or refund my money after begging them for over 30 days. I never received a receipt, either so can't even file a claim with my credit card.

Also, they do business under militaryoffroadtires.net - same guys - John Chameli and son.


I know now that he's banned here at SS - too bad I didn't find that out 2 months ago, lol. Thought I'd post in case he decides to make an appearance...

 

[patracy]

They're banned from the site. He hasn't been to the rally in several years now.

 

[sandcobra164]

I'll have a 1/2 inch drive, but its got the gear reduction with it.View attachment 648393

You don't need the gear reduction. That will break loose lugnuts torqued to 400 ft lbs. I keep one in my truck at all times. It will also tighten them down to spec. Just need a 1/2 to 3/4 drive adapter.

 

[TaylorTradingCo]

I could probably come up with a few used ones to bring. $125

Does anyone have Robotool (Aircraft Dynamics) electric 3/4 impact guns for sale at the rally?

 

[Floridianson]

Anyone need a nice Compressor/dehydrator. I have two and use it for my plasma cutter.
$450 is what I have in to it from GL and that is all I want. It is a Air Techniques and oil less.

 

[izzug]

I could probably come up with a few used ones to bring. $125

I'll take one....

 

[papabear]

We have about 4 extra M151A2 wheels (rims) without tires/tubes/flaps if anyone needs them. Won't bring them unless someone is interested. Don't worry too much about price, they won't be free but they can be bought reasonably or traded for.

 

[CARNAC]

John D out of MD has DOT5. He's planning or trying to post it. He called me today asking if I would deliver. I can't remember what he was asking per gallon but there will be a very short flash to bang time for me to execute pickup from him so be prepared.

I'll text him tomorrow to try and get a price. I don't plan on bringing it unless he has a buyer.

 

[gimpyrobb]

I'm sure what you bring will get sold. I've had lots of folks ask me where to get it, and had no good answer.

 

[gimpyrobb]

According to the manufacturer the gear reduction adapter is not supposed to be used with the impact gun. It is to be used manually.

Yes, that is what the breaker bar is in the kit for.