- 7,744
- 154
- 63
- Location
- Columbus Georgia
Looking for interior repair parts OR the center section of the retractable light reel .... needed for Doc's M170 Ambulance. See me at the Rally if you have anything. Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
2016 Ga Military Vehicle Rally buy/sell/trade thread
- Thread starter clinto
- Start date
- Status
- 410
- 34
- 28
- Location
- Atlanta, Ga
Can someone bring me a few thousand dollars?
- 7,409
- 2,503
- 113
- Location
- Interlachen Fl.
Two air ride seats sold. I got fuel money to get home.
Tanks Guys
Tanks Guys
av8or
Member
- 352
- 4
- 18
- Location
- fort denaud, florida
Great buy!!!
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
Okay got a somewhat complete list of inventory of parts for sale at the Rally, This encompasses the following vehicles
1.) CUCV
2.) 2 and 5 Ton
3.) M35
4.) HMMWV
Get back to me via PM if you see something you have to have, if not will see everyone on Thursday.
1.) CUCV
2.) 2 and 5 Ton
3.) M35
4.) HMMWV
Get back to me via PM if you see something you have to have, if not will see everyone on Thursday.
| PN | Description |
| 8382966-2 | M101 Vinyl Cover Camo |
| 4020861 | CUCV Transfer Case Adapter |
| 8757809 | 5 Step Aluminum Boarding Ladder Sold |
| 800 Series Air Pack (NOS) | |
| CUCV 6.2 after 95 Cylinder Head | |
| 2910011500950 | CUCV 6.2 Injector Set (NOS) |
| Shifter | |
| M880 Tow Adapter (Set) | |
| 28MT | CUCV 24 Volt Starter NOS |
| 2/5 Ton Mud Flap Set | |
| Load Tamer Cargo Net: No Carabiners | |
| Tent Pole Kit | |
| CUCV Bumper | |
| Winch Cable End | |
| CUCV Bumper | |
| CUCV door Passenger | |
| CUCV Alternators Rebuilt | |
| 14038644 | CUCV Throttle Cable |
| 12447175 | HMMWV 4L80E Transfer Case Adapter |
| 14066255 | CUCV Fuel Ignition Idle control (NOS) |
| 19168610 | HMMWV Water Pump 6.5 (NOS) |
| 23500012 | HMMWV 6.2 Coolant Crossover |
| Wrecker Chains | |
| CUCV maintenance kit | |
| CUCV Mirrors Set | |
| Pressure Plate | |
| 26000060 | CUCV Vacuum Pump |
| 2910011500950 | CUCV 4 - 6.2 Injectors (NOS) |
| CUCV Brush Guard | |
| CUCV Injector Lines (NOS) | |
| HMMWV Oil Dip Stick Assembly | |
| CUCV Power Steering Pump Assembly | |
| 6620009935546 | 2/5 Ton Oil Pressure Sending Unit |
| AA52508-1 | Battery Gauge (box only) |
| MS24543-2 | 2/5 Ton Temp Gauge |
| MS24544-2 | 2/5 Ton Fuel Gauge |
| 2 Can Holder Assembly | |
| Flag Bumper Mount Kit | |
| 14057219 | CUCV TH350 Transmission Vacuum Valve (New) |
| 6.2 Oil Pump (NOS) | |
| HMMWV water pump (NOS) | |
| CUCV Front Grill | |
| CUCV Mirror Set | |
| HMMWV Seat | |
| CUCV Pintle Hitch | |
| MS24537-1 | 2/5 Ton Temp Sending Unit |
| 66022 | 2/5 Ton 24V Starter Solenoid |
| 10948079 | M35 Outer Bearing |
| 12554488 | HMMWV Throttle Position Sensor |
| 14028917M | CUCV 6.2 Coolant Crossover |
| SP0930-95-M-1029 | CUCV 24v Glow Plug Relay |
| Tent Pole Bags | |
| 2/5 Ton 24 Volt Engine Starter Switch | |
| 10872023 | M35 Lower Radiator/Upper Hoses Kit |
| CUCV 6.2 Pulley Set | |
| 23861 | HPCA Solenoid |
| 1114373 | 2/5 Ton Starter Solenoid |
| 12338780 | HMMWV & CUCV Oil Filter adapter 6.2 |
| 26214 | CUCV Stanadyne 6.2 Shut off Solenoid (NOS) |
| 5330-00-075-1764 | M35 Axle seal deuces |
| 5930-00-898-0500 | 2/5 Ton Rotary Switch |
| 6616 | CUCV Starter Solenoid NOS |
| 6A84 | CUCV Glow Plug Spares |
| 974-1215-010-09 | CUCV Glow Plug Relay (NOS) |
| MS24537-1 | 2/5 Ton Engine Temp Sender Kit (NOS) |
| MS-53000-1 | 2/5 Ton Dimmer Switch |
| TS6059 | CUCV Engine Temp Sender (NOS) |
| 12 Ton Bottle Jack | |
| HMMWV Jack | |
| CUCV Front Shackle Mount | |
| CUCV 3 belt kit | |
| Transfer Case Mounts (set) | |
| CUCV 6.2 Intake | |
| HMMWV Intake | |
| 25036797 | CUCV Engine Coolant Temp Sender Kit (NOS) |
| Heater Control Assembly | |
| CUCV Motor Mounts Kit | |
| 19207-8738032 | M35 Inner Wheel Seal |
| 3110010308475 | Tapered Roller Inner |
| 8097 | CUCV Power Steering Pump Seal Kit (NOS) |
| 24 Volt Hella Lights | |
| Battery Hold Down | |
| CUCV Exhaust Manifolds | |
| CUCV Fan Blades | |
| Temp sending unit | |
| 14050445 | CUCV CDR Crankcase Hose (NOS) |
| 23861 | CUCV Stanadyne 6.2 AIR/Fuel Solenoid (NOS) |
| 358-180 | 5 Ton Thermostat |
| 3882979 | CUCV U joint Position Holder |
| 55883 | CUCV Choke 6.2 |
| 5743751 | HMMWV Transfer Case Output Seal |
| 6264100 | CUCV Radiator Mount Pair |
| Q-387AS-382A | CUCV Inner Bearing |
| TM59A | CUCV Transmission Modulator (NOS) |
| CUCV Jack | |
| Jerry Can Holder | |
| CUCV Shift Housing | |
| Pioneer Rack - Shovel | |
| Pioneer Rack - AX | |
| Pioneer Rack - Maddix | |
| CUCV 2 belt kit-alt driver/pass | |
| 2/5 Ton shift boot | |
| CUCV Starter Bracket | |
| CUCV Headlight Bezel | |
| CUCV Starter Mount Bracket (USED) | |
| Slave Adapter 2 Pin | |
| CUCV Exhaust Doughnuts | |
| CUCV Injector Guides (Set) | |
| CUCV Headlight Pairs | |
| M1008/09 Gun Mounts | |
| 6264100 | CUCV Radiator Mount Single |
| ms51915-29-2 | Output shaft seal |
| CUCV Lug Nut Spares 4 pcs | |
| CUCV 6.2 Oil Filters | |
| CUCV Transfer Case Ground Guard | |
| Wrecker Boom Ground Support Assembly | |
| 2/5 Ton Mud Flap Set | |
| 3/4 " Tow Pins (NOS) |
- 34,012
- 1,810
- 113
- Location
- GA Mountains
That is a ....."robust" list Swiss. $50 for everything? Depending on price, I might have to need the 28MT starter. Several other items have piqued my interest.
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
For you Kenny 5k for everything
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Awe gheez, just blew my last 5 grand on a possum incubator. Gotta save the pouch babies when momma gets hit.
- 5,580
- 349
- 83
- Location
- DESOTO, KANSAS
For What??? Reason I asked, just found a pretty nice used M939 5T 3 color cargo cover, rubber rope gone $200 OBO on Saturday ain't coming home
5 step aluminum ladder NOS. $100
Last edited:
TruckGuy
Member
- 141
- 24
- 18
- Location
- Belmont, NC
I'd like to get the ladder.
- 3,923
- 76
- 48
- Location
- Comfort, Texas
Gee Swiss. You should open a parts business. I am sure you could beat some the ones that are out there.
![[thumbzup]](https://www.steelsoldiers.com/images/smilies/icon_smile_thumzup.gif "Thumbs Up [thumbzup]"){kind=icon}
- 3,871
- 497
- 83
- Location
- Gray Court SC
Mr mule put cover on hold for me
Bobcat701
New member
- 92
- 1
- 0
- Location
- Autryville, NC
Will the HEMET seats fit the drivers side of an LMTV?
- 3,871
- 497
- 83
- Location
- Gray Court SC
Mr mule found out my buddy got one so please remove hold.
Bobcat701
New member
- 92
- 1
- 0
- Location
- Autryville, NC
I would like one. I PM you last minute. Mess up here in NC, but I am cleared hot for the trip! ETA Thursday PM.
- 62
- 1
- 8
- Location
- Atlanta GA
Do you have anymore aluminum ladders? If so I'll take one. Sorry no
Last edited by a moderator:
mdmorgan
AM3 U.S. Navy
- 1,085
- 103
- 63
- Location
- Forsyth, Ga.
Swiss, I'm interested in the pioneer rack tools. The wife and I are already set up at the rally, see you when you get here.
Sent from my XT1080 using Tapatalk
Sent from my XT1080 using Tapatalk
- 14,653
- 4,850
- 113
- Location
- Buchanan, GA
Sure, you bring the V100 and we'll trade.
wreckerman893
Possum Connoisseur
- 15,630
- 2,054
- 113
- Location
- Akenback acres near Gadsden, AL
This is a recap of what I posted earlier. I think the only thing spoken for is the bolster trailer tire and rim.
I have a butt load of the OD green boxes I sold at the 2015 rally. They are various sizes (most of them are about foot locker size) and some have handles.
Some of them have minor water damage but nothing a good thick coat of OD green paint won't fix. Some of them were used to transport 9mm pistols and still have the foam rack in them. Some can be locked.
Fire sale price is 10 bucks a pop for any size. I need to move these things. They are loaded on pallets and if you want a pallet of them I may take a little less per unit.
I have two 5 ton spare racks for the super singles. One is complete and one is missing the davit pole. No chainfall with either. I'll take a hundred dollar bill for both.
I have two sets of front springs off deuces but one appears to have more leafs in it. Have some U-bolts, shock mounts and misc. hardware. Not sure if there is enough hardware for both sets. Stuff migrates around here. I'll take 150 for both sets. They are also on a pallet.
I have some of the small black mats I had at the 2014 rally. These are anti-fatigue mats but they are small.....like floormat size small. 10 bucks each. Only a few left.
I have a bunch of stainless steel containers and flat pans that came out of a mobile photography lab. These would be very useful for cheese making, candle making or any other process where you need anti-corrosive containers. They fill up a pallet and if you had to buy them you would be looking at a ton of money. 100 bucks takes all.
I have a bunch of misc. 5 ton parts that will be spread out on a table and tagged with what I think they're worth. Included are new air wiper motors, window roller mechinisms (one right, one left). There are also some of the black boxes that mount on the firewall and have a big cannon plug on the bottom. These are still sealed up. Eastern surplus sells them for 390 bucks. I'll take 300 they are still sealed in the original packing.
I still have several of the aluminum flex pipes that were used to remote generator exhaust. 5 bucks each
I'm still rooting through the storage trailer and other places so who knows what else I'll find.
Come by the "Circus Wagon" and see what I have.
I have a butt load of the OD green boxes I sold at the 2015 rally. They are various sizes (most of them are about foot locker size) and some have handles.
Some of them have minor water damage but nothing a good thick coat of OD green paint won't fix. Some of them were used to transport 9mm pistols and still have the foam rack in them. Some can be locked.
Fire sale price is 10 bucks a pop for any size. I need to move these things. They are loaded on pallets and if you want a pallet of them I may take a little less per unit.
I have two 5 ton spare racks for the super singles. One is complete and one is missing the davit pole. No chainfall with either. I'll take a hundred dollar bill for both.
I have two sets of front springs off deuces but one appears to have more leafs in it. Have some U-bolts, shock mounts and misc. hardware. Not sure if there is enough hardware for both sets. Stuff migrates around here. I'll take 150 for both sets. They are also on a pallet.
I have some of the small black mats I had at the 2014 rally. These are anti-fatigue mats but they are small.....like floormat size small. 10 bucks each. Only a few left.
I have a bunch of stainless steel containers and flat pans that came out of a mobile photography lab. These would be very useful for cheese making, candle making or any other process where you need anti-corrosive containers. They fill up a pallet and if you had to buy them you would be looking at a ton of money. 100 bucks takes all.
I have a bunch of misc. 5 ton parts that will be spread out on a table and tagged with what I think they're worth. Included are new air wiper motors, window roller mechinisms (one right, one left). There are also some of the black boxes that mount on the firewall and have a big cannon plug on the bottom. These are still sealed up. Eastern surplus sells them for 390 bucks. I'll take 300 they are still sealed in the original packing.
I still have several of the aluminum flex pipes that were used to remote generator exhaust. 5 bucks each
I'm still rooting through the storage trailer and other places so who knows what else I'll find.
Come by the "Circus Wagon" and see what I have.
- 2,733
- 863
- 113
- Location
- Oakwood, Ga
I found some more items:
These are NOS
These are NOS
| 11664387 | Clutch Disc For 5 Ton Trucks M809 and M54A2 (M39A2) Series |
| 8735507 | Pressure Plate 5 Ton Trucks M809 and M54A2 (M39A2) Series |
| CUCV 1010 & 1028/205 Transfer Case Shifter |
| M100 Landing Leg taken off my M100 |
Last edited:
- Status